Laser XD Vang Kicker Top Harken Block is plain bearing stainless steel body, kicker key is not supplied.

The Laser Curved Kicker Key fits onto the kicker/vang system and slots into the boom.

ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig Features ILCA Class Legal Clevis pins included for attachment and...

Low-friction Carbo Air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter:...

The Laser Harken Power Pack is a complete kit and will upgrade your old Laser cunningham and outhaul. The Harken Power Pack is retrofitable to older hulls and uses existing screw holes. The Power Pack is supplied with FSE ropes, blocks, cleats, screws,...

Harken Race complete kit to upgrade old systems for cunningham and outhaul retrofitable to older hulls, uses existing screw holes, supplied with all ropes blocks cleats and screws and fitting instructions.

The Harken Outhaul Kit with Laser Clew Hook included are designed for Lasers of all types and other loose-footed dinghies. They install permanently on the boom and allow you to instantly attach and adjust your sail in high wind and waves. Full kit...

Harken 16 mm micro bearing airblock complete with Harken twisted metal clew hook, ideal for ILCA, Laser and many other Dinghies Specifications Sheave diameter: 16 mm Stainless Clew Hook Combination Use with Clew Strap

Harken 16mm micro bearing airblock double block with becket for use on the Laser 1. The Laser Double Block is part of Harken's 16mm Block (Harken's smallest) range for small sailing dinghies.This block suits the Laser Vang/Kicker Double Block but is...

The ILCA Laser XD Stainless Steel Block Plate is deck mounted to guide the Downhaul and Outhaul Control lines towards the Harken Deck Jam Cleat . The plate is mounted directly aft of the mast slot and requires 2 x Laser XD Harken 16 mm Air Block...

ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.

Pre-Spliced Laser Primary line for the Cunningham or Laser Downhaul system which connects to the kicker at one end, rigged through the sail and connected to a becket block at the other end. Specification Diameter:3.5mm  Length: 70cm...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Black Pre-cut diameter: 4 mm Length: 1...

Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...

Standard length ILCA Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. For 6:1 system  Features  Smooth cover giving low friction through the...

This ILCA Laser Outhaul / Vang secondary line is made from 4mm Marlow Excel Control rope and provides excellent strength, flexiiblity and strength. Ready to go and cut to the required length of 4.95 mts, Usage Use as Secondary Vang Line for all rigs in...

Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm construction allows precise grip in the jam cleat Durable...

Large original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Large

Small original traveller plain bearing block, plastic construction, uses englefield clips or sometimes called kissing clips to connect to the traveller block. Specifications Material: Plastic Colour: Blue Size: Small

The Laser Block Ratchet Spring is to hold your ratchet upright, the spring is heavy duty. Replacement stainless steel spring to suit stand up blocks such as the Laser Harken 57 mm Carbo Rachet Block (LS-91333). Specifications Size: Large

Harken Carbo Ratchet Blocks allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Harken 57 mm Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front or side positions, or swivel to...

Harken ILCA Laser complete mainsheet block set includes stainless steel rivets - Official ILCA class approved , this block set uses ILCA exclusive Harken bearing blocks and will fit any Laser or ILCA class dinghy. Features Enhanced performance and...

Harken ILCA Laser double block for traveller and mainsheet rigging - For performance sailing  Features For performance sailiing Lightweight Helps crank boom down hard when beating ILCA Class legal Suits all Rigs  Also suits Laser...

High performance Harken boom end, mainsheet block with becket for all rigs ILCA or Laser Dinghies Features ILCA Class Legal High performance Suits all Rigs  Suius Laser XD   

ILCA Laser high performance Harken middle boom mainsheet block with bearings - This block is permanently fixed to the laser boom and riveted in place with a stainless steel eye strap Features ILCA Lass Class legal High performance Harken design...

Pre-cut, high performance ILCA Laser traveller line in Marlow Dyneeme D12 - Suits all rigs, allows hard crank down on the traveller to bring the blocks close to deck eye Features Low friction Lightweight Low water absorption Superb low stretch for...

ILCA Laser Traveller Line, made from Marlow Excel Dyneema D12 SK78, the high strength gives the confidence to hike the traveller down hard Features Low friction Lightweight Low water absorption Superb low stretch for ultimate tension on the...

Rooster's Polilite revolutionary, non-twist mainsheet line continues to the preferred choice for leading sailors in ILCA and Laser Dinghy classes. With the load bearing outer cover gripping the lightweight inner core the risk of being confronted by a...

Optiparts Optimist Trolley Bow Wow Replacement Kit is a unique system to lock the bow to the Optimist trolley with one quick and simple movement. Prevents the hull from sliding off on steep launch ramps.

Optiparts Duralite puncture and temperature proof dinghy trolley wheels Suitable for 25mm dia. x 75 mm axles Features Diameter: 37 cm Ultra light weight: 1750 g

The Optiflex-lite trolley wheels are the ultimate in wheel design. Large Optiflex-Lite puncture proof wheels for Optiparts Optimist trolleys - the ultimate in wheel design. Features Diameter: 37 cm Ultra light weight: 1750 g

An Optipart Trolley Wheel Clip in R-Pin style to secure the trolley wheel onto your Oppie trailer. Specifications Material: Stainless steel Style: R

Lightweight aluminium trolley for the Topper Topaz. Spring locking quick release of all parts allows the trolley to be disassembled in a matter of seconds for storage and travel. The frame has welded joints and is anodized to prevent corrosion. This...

Lightweight  and collapsible aluminium launching trolley for the Topper Sailing Dinghies  The bow locks into an angle shaped, padded support and the hull rests between 2 side supports. This provides a stable support for the Topper hull. Spring...

Improved lightweight aluminium Optimist trolley with new hull supports. With bow wow, a unique system to lock the bow to the trolley with one quick and simple movement, preventing the Optimist hull from sliding off on steep launch ramps. This...

The Mast Step Plug is made from Delrin and fits onto the bottom of the lower section of the Optimist Mast. This is the low friction version of the standard Heel Plug which is suitable for racing and school masts.

Optimist clamcleat with becket for Optimist halyard on Blackgold mast.

Specifications Ring material: Stainless steel Length: 3 mm

Optiparts Optimist Pins Stop for Optimist spars as used on the Silver and School spars from Optiparts. Specifications Colour: Silver

Replacement pin stop as used on the Blackgold mast for Optimist. Provides more effective Optimist downhaul function for Blackgold mast. Specifications Material: Aluminium Colour: Black Hole for mounting: 3 mm