SAILBOATS & PARTS

Designed to give extra confidence to those new to sailing or learning new skills, mast head floats can help reduce the risk of boats inverting during a capsize. This 9L Crewsaver Mast Floats is an elogated design with a heavy-duty fabric construction...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Specifications Fasteners: 5 FH mm (#10 FH inch) Mounting hole spacing: 3 15/16" (100 mm) Low-load endstop: 173 High-load endstop: 263/E2200 Line...

The Barton Size 3 Single Camcleat Block is designed for small to mid range vessels and come with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for money and...

The Barton Size 5 Single Variloc & Becket Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for...

Barton furling drum 42334 for use on Jibs fitted to dinghies, catamarans and day boats. Use in conjuction with Barton Furling Top Swivel part no 42336.  Suitable sail areas up to 60 sq ft (5.74 sq m) Features For sail areas up to 60 sq ft (5.74 sq...

The high-strength composite T2 is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 Loop’s on/off...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark...

These combined swivelling deck fairlead and camcleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold seperately). For the replacement cleat on its own (See Code: LS-91484).

The Barton Size 2 Deck Organiser with 3 Sheaves suits up 14mm lines and is designed for use when leading control lines and halyards across the coach roof and back to the cockpit. This range features aluminium construction with 'Spectro' grey...

The Barton Size 2 Single Snap Block is designed for small to mid range vessels and come with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for money and...

The Barton Size 6 Triple Reverse Shackle Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for...

Optimist Halyard system with Windesign low friction ring. This halyard system is used on all Optimist Blackgold masts from 2017. The combination of Harken hook-in block, Dyneema spliced halyard line and Windesign low friction ring creates the most...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic line, these small, compact blocks have very high working loads for safe, easy trimming. The 40 mm fiddle is an excellent choice...

Harken Classic Block Single 001 2.25". The classic Harken dinghy block designed for 10mm rope with one plastic sheave. The Harken 2.25" (57 mm) block is compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies,...

The Optiparts Optimist School Sprit 25 mm has no chafe protection tube and is the direct replacement for the Oppie Training Sprit. Specifications Diameter: 25 mm

Plastimo 25184 bottom spar to suit Twin Track Plastimo furling systems, models - 406S, 609S & 811S. In the Pack 1 x Single channel alloy spar 2.15m x 31mm dia. About the Spars in a Plastimo Furling Systems  For Twin Track Furlers Models -...

The Barton Size 6 Fiddle Reverse Shackle & Becket Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great...

The Barton Size 7 Double Reverse Shackle Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1" (25 mm) Maximum wire diameter: 3/32" (2 mm) Maximum line diameter: 5/32" (4 mm) Fasteners: #10 RH inch (5...

The Laser Bahia Cap Shroud are supplied by RS Marine and come complete with rigging attachments for an easy install. Specifications Stainless steel wire

See the 2.25" Block for single rope with becket included. Sheave diameter: 2.25" or 57 mm. The classic Harken dinghy block for 12 mm rope with single sheave and becket. Harken code: 002. The 2.25" (57 mm) block is compact and lightweight, with fast trim...

These Lewmar HTX single blocks are ideal for frequently adjusted, highly loaded systems using modern line technology and reduced line diameters. Drawing upon the design of the racing range, the HTX blocks are constructed simply from high quality...

Lewman replacement hinge kits for the low profile hatch range. Includes 35001543-A - (1) LP Hatch Fit Hinge Pin Leaflet 35001604 - (2) Alloy SZ10 Dog Bone 38001020 - (2) Hinge Jacking Assy 38001523 - (4) HIN-PIN ALI Taper C-W Sleeve 35001720 - (4) LP-MP...

Wichard 2473 HR forged stainless steel snap shackle with swivel eye. Easy to open by pulling the plunger pin.  Specification Materials: HR 17.4 PH stainless steel grade Working load 960kg Breaking load 2000kg Weight...

Fiddle Blocks have a smaller sheave attached which is used to reduce the width of the purchase system instead of a normal double block. Typically used for kickers,cunninghams or outhauls. The Barton Size 5 Fiddle Swivel Block is designed for larger...

The Barton Size 5 Single Block - Variloc with Shackle is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value...

The Barton Size 6 Single Swivel Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for money and...

New style Barton Size 2 Fiddle, Cam Block with swivel shackle eye and Becket with cotter pin closure - Suitable for general purpose Dinghy Van Systems. Suits the Topper Topaz lower kicker block. Specification Max Rope Dia 8mm SWL 370kg Break Load 740kg

Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven...

Spinlock PXR Cam Cleat PXR0206/VP - Vertical Pivot version for 2-6mm lines - Provides a vertically fixed, pivoting sheave and cleat in an ultra compact design This will suit various mounting positions for centrally feeding control lines out to...

Barton Sliding Loop for 32mm 'T' track features a heavy duty stainless steel attachment loop and through-bolted and riveted for extra strength.

Lewmar Winch Service Kit 6-43 - Suitable for most Lewmar Winches Sizes 6 to 43. Contents: 4 x Circlips 4 x Pawls 4 x Pawl Springs Lewmar Part No: 19700100

The low-friction Harken 57 mm carbo blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these 57 mm compact blocks have very high working loads for safe, easy trimming. Harken 57 mm blocks...

Endstops absorb shock loads and prevent damage to the car. Kits include endstops, Loctite, 2 slug mounts. Loctite is a trademark of Hankel AG and Company KGaA. Specifications Mounting slugs per kit: 2 Fasteners: M5 mm Weight: 0.5 oz. (14 g) Note:...

The Laser Vago Trapeze Wire comes with stainless steel wire pre-attached to a rope jammer and plastic handle. Features Controls the trapeze height. Pre-assembled for easy install Specifications Laser part no: 90233

This Lewmar large grey handle replacement kit includes left and right hand handles and assembly components.  Includes 38001288 - (1) Exterior Handle Right Hand Assembly Grey 38001287 - (1) Exterior Handle Left Hand Assembly Grey B4088 -...

Aluminium tiller complete with deluxe aluminium tiller extension (releasable joint/swivel with rope core and new grip). Features Tiller extension comes with soft grip handle Suitable for all Optimist sailing dinghies Specifications Material: Aluminium...

New slimline range of organisers for leading lines to the clutch. - Modular end fairings for safe side loading- Sheave spacing identical to previous model- No base plate needed- New profile composite sheaves- T38 stacks on T38Rope Range : 3mm -...