Features Designed for flybridge and open cockpit applications IP67 - protected against immersion up to 1 m for 30 minutes Independent label backlighting circuit for remote switching and dimming Integrated ATO/ATC fuse based circuit protection Each panel...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches ON indicating LED's embedded in switch Watertight mounting gasket Countersunk mounting holes throughout Two-part polyurethane slate gray finish Completely wired and ready to install Will withstand the water exposures...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features ON-OFF contura switches Watertight mounting gasket ON indicating LED's embedded in switch Designed for flybridge and open cockpit applications Push button reset-only circuit breakers with waterproof boots Panel front is rated IP66-protected...

Features Watertight mounting gasket ON-OFF-AUTO contura switch Completely wired and ready to install Designed for flybridge and open cockpit applications Fuse holders accept commonly available AGC and MDL glass fuses "ON" LED embedded in switch...

The Blue Sea Contura Switch Mount is perfect for installing up to 3 switches on a dashboard or fly bridge. The switches clip in and are sealed with the gasket supplied with the Switch. The outer side of the mount should be sealed if required to be...

Use this Roca Carling Blank Switch Cover to block up unused sockets in your switch panel. Fits the Roca panels (see related products)

As under Roca part no: 466060. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for windlass switches. These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466036. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for windlass switches. These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466036. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for windlass switches. These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466067. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for Bilge pumps. The bilge Switch has 1 on the label so this can be used for a main or primary bilge pump.These actuators do not...

As under Roca part no: 466024. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for trimtab controls.These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for any Roca LED Lights. This switch label is blank but comes with a light window.These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466025. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for fans.These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466066. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for interior lights. These actuators do not work with Rule or Bluesea Switches. Only use with Roca.

As under Roca part no: 466034. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for labelling anchor lights. The Anchor Light Switch is recommended for 2 postion on-off switches (see related products)These...

As under Roca part no: 466067. These plastic Roca Actuators fit the Roca Carling Switches (see related products) suitable for Bilge pumps. The bilge Switch has 1 on the label so this can be used for a main or primary bilge pump.These actuators do not...

Carling switch actuator with Bilge Pump decal - Can be used with illuminated or non-illuminated Carling marine switches

A fully waterproof Carling Switch with Red LED when activated useful as a marine navigation lights or fan switch. A waterproof Carling Switch suitable for pumps, anchors and more. This switch has three positions: On, Off and On. This can be useful as a...

A fully waterproof Carling Switch useful as a light switch. A waterproof Carling Switch suitable for pumps, anchors and more. This switch has two positions: Off and On. This can be useful as a switch for marine lights. The switch actuator is sold...

Jabsco Oil Change Pump with reversible motor and a 24 V power supply. The Jabsco Oil Change Pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine,...

The Jabsco Oil Change Pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be...

The Jabsco Flat Tank Engien Oil Changer is a portable and easy to use oil changer which will empty oil sumps on engines up to 4 cylinders including 4 stroke outboard engines. Features Self-contained engine oil change kit, ready to use Convenient...

Jabsco Utility Pump Handy Boy is a slightly larger version of the Little Pal Pump. This is a very versatile pump with many useful applications, include bilge pumping, oil draining, diesel fuel transfer and other liquid transfer applications. Long life...

A few jiggles of this fuel syphon soon has fluid flowing. Can be used as a syphon feed or fluids can be lifted to a height controlled by the length of the hose by continuous movement pump. Uses 19mm hose. Features Allows pumping without electricity...

A few jiggles of this fuel syphon soon has fluid flowing. Can be used as a syphon feed or by continuous movement pump fluids can be lifted to a height controlled by the length of the hose. Uses 12mm hose. Features Allows pumping without electricity...

Portable pumping kit suitable for diesel, fresh and salt water. Quick diesel transfer with no spillage.  Water transfer, deck shower, or deck wash. Kit includes: Rule Inline 12v IL500 Plus pump Spray nozzle 4m cable with battery clips 4m...

A portable pumping kit suitable for diesel, fresh and salt water.  Quick diesel transfer with no spillage. Water transfer, deck shower, or deck wash. Kit includes: A Rule Inline Pump 12v 280 Plus  Spray nozzle 4m cable with battery clips...

A portable pumping kit for water transfer, deck shower or deck wash suitable for fresh or salt water. Kit includes: Rule Inline 12v iL200 Pump Spray nozzle 4m cable with battery clips 3m food quality layflat hose Specifications: Cable...

A centrifugal submersible and inline pump suitable for diesel, fresh and salt water. Quick diesel transfer with no spillage. Bait tank aeration, diesel transfer, water transfer. Specifications: Cable Length: 1(m) Connections: 1/2"...

Protects jabsco flexible impeller bilge pumps from dry running. Senses loss of inlet vacuum when bilge is dry and air enters pump and then cuts power to motor or electro magnetic clutch. Protects any 12 V or 24 V DC electric or electromagnetic clutch...

Electro Magnetic 2" Clutch Pumps 24 V - Single Pulley with Flanged Ports 27-size, foot mounted with 2" flanged ports 24 V DC electric clutch with 1B pulley. Features Bilge and deck wash pump Bronze body, stainless steel shaft Can handle moderate amounts...

Jabsco Electro Magnetic 2'' Clutch Pumps available in 12 V with a single pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Jabsco Electro Magnetic 2" Clutch Pumps available in 12 V with a double pulley. 2" bronze pump, 270-size, foot mounted with BSP threaded ports. The Jabsco Jabsco 2" Magnetic Clutch Pumps can output 300 litres per minute and is suitable as a heavy duty...

Jabsco Electro Magnetic 1 1/2" Clutch Pumps 12 V Pulley Double 'A' - Flanged Ports 2-size, foot-mounted with flanged ports 12 V DC electric clutch with 2A pulley. Features Heavy duty bilge and deck wash pump BSP threaded port adapters available Bronze...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 24 V DC and double pulley. The Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump which...

Jabsco 1.5" 38 mm bronze pump, 200 size, foot-mounted with BSP threaded ports available in 12 V DC and single pulley. The Jabsco Jabsco 1.5" Magnetic Clutch Pumps can output 195 litres per minute and is suitable as a heavy duty bilge and deck wash pump...