Description The Laser Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Standard Sailing Dinghy...

Description The Laser Pico Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Pico Sailing Dinghy...

Description A set of Laser MK1 Battens to suit Laser Standard, Radial and 4.7 Sails. Features Old style design no longer used for racing events. 3 per pack (suitable for one sail) Strong and flexible plastic design Comes with batten caps to protect the...

Description Laser XD Deck Plate Stainless Steel Features Deck plate to attach the outhaul and cunningham blocks Stainless steel

Description The Laser Bahia Trolley Stacker is a galvanized support that fits onto the side of your Laser trolley and allows to you to carry two or more boats at the same time. Features Water resistant galvanized steel. Fits all Laser Bahia Sailing...

Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  The Laser 4.7 Lower Mast is pre-bent with 5 degree angle as standard. Features Waterproof anodized aluminium Comes with gooseneck and...

The Laser Funboat Mainsail Small Rig is a direct replacement for the Laser Funboat sailing dinghy. Features Small rig size Extra strength polyester Training or club use Specifications Material: 6.3oz Polyester Twin Ply Leach Laser part no: 95700

The Laser Standard Sail Mk II Folded is an official replacement for the on on your sailing dinghy and can only be used for recreational (non-race) use. Features Comes with The Laser Class button and folded sail bag Not allowed in ILCA racing Bi-radial...

The Laser Vago Deck Cover 87113 is a waterproof polyestercover to protect your sailing dinghy from while not in use.

RS Sailing Toestrap to fit the middle section of a Laser Pico Dinghy. Specifications RS part no: PIC-HF-400

Replacement Mainsail for the Laser Vago sailing dinghies. Features Comes with sail bag Specifications Laser part no: 95505 Material: Polyester

Description The Laser XD Power Pack contains Harken Main Sheet & Traveller lines and also the blocks for each included in a handy set. Features Pre-cut sheets for the Laser Standard Taveller and Main Sheet. Main sheet, Stand-up spring and traveller...

RS Laser Bahia mainsail in dacron supplied with battens and sail bag - Orginal Laser Performance version Specification The Laser Bahia mainsail size is 9.50 m2 This is the smaller reefable mainsail Supplied including a long sail bag Material Dacron

The Nuova Rade Fuel Tank Cap Blue is a replacement fuel cap for the Nuova Rade Ercole and Sogliola fuel tanks. Features Comes with bleed valve to stop pressure build up Fuel resistant o-ring

Lalizas / Nuove Rade expanding boat plug 35mm 

The Nuova Rade Telescopic Boat Hook with 2 ends comes with a grabbing hook to catch mooring lines and a orange cushioned head to push away objects. The boat hook is extendable up to 196cm and comes in aluminium. Features Lightweight and easy to...

The Nouva Rade Top Line Deck Hatches are suitable for vertical or horizontal installation typically outdoors on boats. The top line feature means the hatch lid covers the frame when closed hiding the installation screws and creating a neater appearance...

The Opinel Folding Knife is a staple of marine activities and can be seen used in work or leisure settings. The folding knives comes in size No. 7 with a 7cm blade making it handy as a pocket knife. The knife now comes in pure stainless steel...

The precision Victorinox Paring Knife is the ultimate multitasking, go-to knife.  Ultra-sharp, wavy edge with an ergonomic handle. Features Stainless steel Swiss made paring knife with a serrated edge Dishwasher safe Specifications Length of...

The precision Victorinox Paring Knife is the ultimate multitasking, go-to knife.  Ultra-sharp, wavy edge with an ergonomic handle. Features Stainless steel Swiss made paring knife with a serrated edge Dishwasher safe Specifications Length of...

Classic Ibberson 2 Piece Riggers Yacht Kit. Features 10cm straight stainles steel blade Stainless steel knot melting tool Leather sheath

The Loewen Messer Filleting Knife 325R comes with a black plastic handle and water resistant stainless steel blade. Its similar to the Loewen Messer 825 Knife but this one comes with a wider blade for heavier duty work. Specifications Stainless steel...

A classic Loewen Messer Knife 822 with a wooden handle typically used for commercial fishing or any heavy duty use. The blade is a thick water resistant carbon steel with a straight edge. Specifications Wooden handle-Bubinga wood 7cm blade Carbon steel...

Description The Ibberson 5 Piece Yacht Kit is a multi pack of tools used for sail maintenance and repair. Comes with: Stainless Steel Blade Riggers Knife with serrated edge for rope cutting Stainless Shackler Spike Plated Pliers, Screwdriver Adjustable...

Description The KORG18-1 is a low friction die cut fairlead with a single wide passage. It allows to support very heavy loads for a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

Description The Karver KORG18-2 Deck Organizer is a low friction fairlead cut with 2 passages of 18mm max line. It supports very heavy loads with a minimum weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

Description The Karver KORG18-3 Deck Organizer is a low friction fairlead cut with 3 passages of 18mm max line. It supports very heavy loads with a minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

Description The Karver KORG18-4 Deck Organizer is a low friction fairlead cut with 4 passages of 18mm max line. It supports very heavy loads with a minimal weight. Features Block machined aluminum Hard anodization with Teflon to limit friction Light and...

When it comes to Lagoon, what you see is what you get: a cleverly designed water bottle that keeps you hydrated wherever you go. This bottle is easy to use on every level. Thanks to the spout lid and angled straw you don’t have to tilt your head...

Drinking from the Lagoon is child’s play, and with the Lagoon kids bottle you can take that literally. Your little munchkins can play all day while sipping from their water bottle. The spout lid enables an easy drinking experience and thanks to the...

If you thought the perfect water bottle didn’t exist, think again. The Kambukka Elton Water Bottle has a 3 in 1 lid with a ‘push’, ‘always open’, and ‘locked’ position, which enables a smooth drinking experience...

Kambukka Lagoon 400ml (14oz) Flamingo with Spout Lid - for thirsty superheroes. Features Dishwasher safe BPA free Tritan body - will not stain or retain odors Durable with high impact resistance Leak proof Specifications H.: 16.9 cm H without...

The Etna thermal bottle serves you a hot coffee when you struggle to stay awake at work, or an ice-cold drink after a tough workout. When you’re on your way from one activity to the next, it will not only keep your drink hot for 9 hours and...

The Kambukka Etna S/S Tumbler Deep Teal 300ml serves you a hot coffee when you struggle to stay awake at work, or an ice-cold drink after a tough workout. When you’re on your way from one activity to the next, it will not only keep your drink...

The Etna thermal bottle serves you a hot coffee when you struggle to stay awake at work, or an ice-cold drink after a tough workout. When you’re on your way from one activity to the next, it will not only keep your drink hot for 5 hours (300 ml) or...

The Kajak Sport Oval Hatch Rims are precision-made for hatch covers (sold seperately). The rim is made of durable and gluable ABS-plastic. Using our covers together with our rims you can have the best possible water tightness and easy access to your...

The Kajak Sport J-Carrier Adapters have interchangeable roofrack adapters and are fully compatible with Thule roof rack profiles. This adapter can be used with airfoil roof rack profile.

Description The Jotun Hardtop XP Hardener Comp B is the hardener for the 2 part topcoat series of Jotun Hardtop. The second part is sold seperately under Comp A. Features Used as a hardener for Jotun XP Hardtop Recommended for offshore environments,...