Victron Phoenix Inverter VE.Direct - UK Plug

Victron's Phoenix VE.Direct Inverter is the smallest in the range with a single 3-pin UK socket to plug your appliance directly into the inverter. Add a VE.Direct Bluetooth Smart Dongle to monitor the inverter on your smartphone via the Victron Connect App.

Fully configurable

• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off load dependent cut-off level
• ECO mode on/off and ECO mode sense level

Monitoring

• In and output voltage, % load and alarms

The VE.Direct port can be connected to

• • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15 W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

LED diagnosis

A red and a green LED indicate inverter operation and status of the different protections.

This product is also available in 48v if required 

Phoenix Inverter VE.Direct 250VA - 1200VA Datasheet