Victron GX Tank 140 Fuel Sensor Controller

The Victron GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for Victron's range of GX system monitoring products of which the Cerbo GX is the most commonly used model.

Tank levels can be read-out locally in the system, as well remotely through Victon's VRM Portal.

The GX Tank 140 is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Monitoring Device is via USB, which is also how the GX Tank is powered: no additional power wires required.

Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24V power supply, to power the sender. The other two channels do require an external power supply, and there is a power in terminal together with fused outputs to facilitate that.

Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example 0 to 5 V.

Features

• Accepts up to 4 Sensors
• NMEA 2000 Compatible to other displays such as an MFD
• Fault reporting for sensors and wiring issues
• Reading are dampened to give mean average. The damping can be configured between 1 and 60 seconds.

In the Box

• GX Tank 140 unit with non-detachable 1.5m long USB cable
• 1x 2 way pluggable terminal block (for external power supply)
• 4x 3 way pluggable terminal block (for sensor connection)

Manual

Download manual here