Description
This cable is intended for on/off control of the Skylla-i when the source signal is high when the Skylla-i must be on, and low or free floating when Skylla-i must be off. This cable can for example be used for on-off control of the Skylla-i by the VE.Bus BMS.
Specifications
- Maximum input voltage: 70 V
- Minimum input voltage needed for switch on: Approximately 6 V
- Switch off level: input voltage must be less than 1 V or must be free floating
Optional Extra
Skylla-i
Lithium battery 12.8V & 25.6V Smart
VE.Bus BMS
Technical Files
Related Products
Related Products
Victron Energy Inverting Remote On-Off Cable
Victron Energy
Current Stock: 0
SEK327.65
The Victron ASS030550120 Inverting remote on-off cable is intended for products which require active pull down of theremote control terminal to switch on, while the source signal turns high when...
VASS030550120
Victron Energy Non-Inverting Remote On-Off Cable
Victron Energy
Current Stock: 0
SEK245.15
Use this cable to connect the following products to the VE.Bus BMS: Skylla-TG all models Battery Protect models BP40i, BP60i and BP200i (all discontinued) The cable translates the remote on/off...
VASS030550200
Victron Energy Skylla Control
Victron Energy
Current Stock: 0
SEK2,398.30
The Skylla Control allows you to alter the charge current and see the system status. Specifications Height: 65 mm Width: 60 mm Depth: 40 mm Optional Extra Skylla-TG Charger Skylla-TG GMDSS
VSDRPSKC
Victron Skylla-i 24v Battery Chargers
Victron Energy
Current Stock:
SEK17,704.39 - SEK25,088.29
A modern and powerful battery charger.
Key Features
The right amount of charge for a lead-acid battery: variable absorption time
BatterySafe mode: preventing damage due to excessive...
Victron Energy Ethernet Remote
Victron Energy
Current Stock: 0
SEK6,143.50
Victron Ethernet Remote: A GSM/GPRS modem with Ethernet connection The Ethernet Remote has the same functions as the Global Remote. An extra function of the Ethernet Remote is that it can connect...
VVGR200100000
