Victron Energy Lynx Distributor (M8)

A modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system, available as M8 and M10 models. Note that M10 refers to the busbar connection joints where the lynx modules are connected to each other. The fuse and cable connections are always M8.

Key Features

• Positive & Negative 1000A Busbars in a single unit
• Designed to hold and monitor 4 MEGA Fuses (sold seperatly)
• Easily connects to other Lynx Modules 
• LED indication to show status of fuse

In the Box

• Lynx Distributor (M8)
• 0.4m RJ10 Communication Cable
• Reverse Sticker in case of upside down mounting

Description

The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.

The Lynx Distributor has a power LED and four fuse status indication LEDs.
If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This
feature is not available when connected to a Lynx Shunt VE.Can

The Lynx Distributor ships together with a 40cm RJ10 cable. This cable provides power to the Lynx Distributor and is also used to transmit data if connected to a Lynx Smart BMS.

The Lynx Distributor is designed to hold MEGA fuses. These need to be purchased separately

Victron Lynx Distributor Manual