Victron Energy Lithium NG Batteries

Building upon the success of Victron's Lithium Smart Series, the NG (Next Generation) series incorporates significant enhancements. Victron Energy Lithium NG batteries are Lithium Iron Phosphate (LiFePO4 or LFP) batteries available with
a nominal voltage of 12.8 V, 25.6 V and 51.2 V in various capacities. They can be connected in series,
parallel and series/parallel so that a battery bank can be built for system voltages of 12 V, 24 V or 48 V.
The maximum number of batteries in one system is 50, which results in a maximum energy storage of
192 kWh in a 12 V system and up to 384 kWh in a 24 V and 48 V system.

*Important : Victron NG Batteries must use Victron NG BMS and are NOT Compatible with Victron Smart Lithium Batteries or BMS units*

Key Features

• Multiple improvements including added read-out of cell voltages and temperatures
• Maximum single bank size increased to 385kWh
• Modules available in 12, 24 and 48V
• Protection class IP65
• Bracket mounting and strap mounting. 

Integrated shunt

The battery data (battery voltage, current and temperature) are transmitted to the BMS and evaluated
there, i.e. to calculate the state of charge, which can then be read out via VictronConnect or a GX
communication centre, or to create and issue specific warnings and alarms.

Automatic setup, monitoring and control via VictronConnect App or a GX device and the VRM Portal

All battery parameters are managed by the BMS automatically. The BMS automatically detects the
system voltage and the number of batteries in parallel, series and series/parallel connection. The BMS
(from now on Lynx Smart BMS NG 500 A/1000 A, further models to follow) is mandatory and must be
purchased separately.Monitoring and control take place via VictronConnect (every BMS model has Bluetooth), a GX
communication centre or the VRM Portal. You can view battery parameters such as cell status, cell
voltages, battery current and temperatures in real-time. The battery firmware is automatically updated
by the BMS.

Easy bracket mounting

Mounting brackets make the installation easier and ensure that the battery is optimally secured against
slipping and tipping over.

Increased ingress protection (IP-rating)

The Lithium NG batteries are effectively sealed against dust and can withstand low-pressure water jets,
making them suitable for environments where exposure to dust and water is a concern.

Low self-discharge rate

The self-discharge rate has been significantly improved and is now a maximum of 2 % of the battery
capacity per month. A low self-discharge rate contributes to the overall performance, longevity, and
reliability of the NG batteries.