Teleflex Dual Station Selector Unit -204993

Teleflex Dual Station Systems for single or twin engine installations, using dual function controls only

This Dual Station Selector Unit TX204993 is used in conjunction with the Gearbox Exchanger Unit 207573  to lock the system to either the Upper or Lower Control position to prevent accidental kick back

The Selector is connected to the Gearbox Exchanger Unit by means of a 33C Type Cable. The Station selector should be positioned at the lower or most oftern used station. 

Features:

• Creates dual station position on any vessel 
• Can be used in conjunction with any dual action level control 
• Use Twin version of the controls for twin engine installation
• Connects using any 33C type cable

Components required to set up Dual Station Control - Single Engines

1. 1 x Upper Station Dual Action Control
2. 1 x Lower Station Dual Action Control
3. 1 x TX204573 Gearbox Station Exchanger Unit
4. 1 x TX304572 Throttle Station Exchnager Unit
5. 2 x 33C Cables to connect the Upper station to the Throttle and Gearbox Exchanger Unit
6. 2 x 33C Cables to connect the Lower station to the Throttle and Gearbox Exchanger Units
7. 1 x TX204993 dual station selector
8. 1 x 33C cable to connect dual station selector to the Gearbox  Exchanger Unit

Components required to set up Dual Station Control - Twin Engines

1. 1 x Upper Station Dual Action  Twin Control
2. 1 x Lower Station Dual Action Twin Control
3. 2 x TX204573 Gearbox Station Exchanger Unit
4. 2 x TX304572 Throttle Station Exchnager Unit
5. 4 x 33C Cables to connect the Upper station to the Throttle and Gearbox Exchanger Unit
6. 4 x 33C Cables to connect the Lower station to the Throttle and Gearbox Exchanger Units
7. 2 x TX204993 dual station selector
8. 2 x 33C cable to connect dual station selector to the Gearbox  Exchanger Unit

Installation Diagram for Single Engine, Outboard or Inboard Dual Station Controls