Star brite Rust Eater and Converter - 650ml

Directions

• Surface must be free of oil, grease, loose rust and flaking paint
• Use degreaser and light sanding or wire brushing to prepare surface if these conditions are present
• Coat surface with product by spraying, brushing or dipping. For best results, use at temperatures above 21º C
• If surface is going to be painted, allow treated surface to dry thoroughly for 2 hours, then apply oil based, urethane or epoxy paint
• If the treated area will not be painted afterwards, apply directly to surface and allow it to work for 1-2 minutes before rinsing treated area with fresh water
• Towel dry surface and apply an appropriate protective oil
• If sprayer is used, pump clean water through for about 1 minute before storing