Sikaflex 290DC Caulking Primer 250ml

METHOD OF APPLICATION

• Surfaces must be clean, dry and free from grease, oil, dust and contaminants.
• Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing and cleaning.

Application

• Apply a thin but covering coat of Sika® Primer-290 DC with a clean, dry brush.
• Be sure that the teak is completely covered by the primer but avoid excess of material.
• Primed surfaces should be left for a minimum of 60 minutes before sealing or bonding with Sikaflex® products.
• In case of spray application contact the Technical Department of Sika Industry.
• Ideal application and surface temperature are between 15 °C and 25 °C.
• Sika® Primer-290 DC has to be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal container immediately after each use.

See the Safety Data Sheet here