Seastar Teleflex Rack & Pinnion Cable Steering Kit - SS141

The SeaStar rack & pinnion, mechanical steering kit is the best choice for stern drives, outboards, inboards and other power assisted steering applications. Suitable for vessels up to 24ft and Outboards up to 100hp

The new rack system features precision control and the comfort of a four turn helm . The cable, helm and bezel kit are easy to install with low on-going maintenance.

In the Kit

• Steering Helm SH5210P
• Bezel Kit  SB39526P 
• Rack & Pinnion Steering Cable SSC13415

Features

• Precise, easy 4 turns lock-to- lock
• Rack & Pinnion System
• Standard 3/4” round tapered steering shaft
• Stainless steel cable output ends •
• Meets A.B.Y.C. standards
• Meets N.M.M.A. certification requirements

How to measure a replacement cable installation

Measure Existing Cable as follows: Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30", and round up to next foot. Order that length cable.

How to measure  first-time steering cable installation

Measure cable routing path in boat as follows:

A = Center line of the wheel to gunwale (inches)
B = Dash to transom (inches)
C = Gunwale to cable connection at centered tiller (inches)

For tilt tube mounting, add A + B + C + 6", and round up to the next foot. Order that length of cable. For transom/splashwell/stringer support mounting, add A + B + C, then subtract 6" and round up to the next foot. Order that length of cable.