SAILBOATS & PARTS

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Common uses: Main/jib Sheets,...

Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Predrilled with holes for mounting fasteners and one pinstop hole between each fastener. Specifications Fasteners: 8 FH mm (5/16) Mounting hole...

The Laser Bahia Mast Step is supplied by RS Marine. It comes in aluminium and is use dto attach the mast to the deck of the Bahia.  

The Barton Size 5 Stand Up Block is designed for larger cruising and racing yachts with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for money and...

Polyropes White Halyard Sheet 10mm x 35m: pre-made halyard with Wichard shackle Features Ready to go, pre-made Poly-Braid-32 halyard with Wichard key pin shackle Poly-Braid 32 from PolyRopes has a 32-braided Polyester filament cover round the unique...

Lewmar low and medium profile replacement friction lever kit. Includes 35001899 - (1) Gasket Adhesive L Friction Lever 15801279 - (2) Small Upper Pivot 15801319 - (2) Rivet Washer 350010190 - (1) LP Exterior Cap Grey 350010500 - (1) LP Round Lower Pivot...

The 240 and 241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Specifications Minimum line diameter: 1/8" (3 mm) Maximum line diameter: 3/8" (10 mm) Fastener spacing: 1 1/32" (26 mm)...

This Foot Block is manufactured from Bartons marine grade aluminium and 'Spectro' grey anodised for extremely high UV stability and longevity. Hollow stainless steel rivets allow for through-bolt fastening, giving added strength.Through-bolt mounting...

ILCA Harken XD Outhaul & Downhaul Deck Ceat with Harken Double Jammer. Suits all models ILCA & Laser - Official branded ILCA product. Fasteners 2x A4 Stainless 10 x 1 1/2" self tappers Use sealant in when installing.

Lewmar DC1 Single Rope Clutches have a series of smooth, in-line and parallel rings hinged at the base. The line is run through these rings which are then tilted by a single connecting lever. When tilted, the rings force the line to snake through them,...

The Rooster Carbon Tiller Extension 1250mm is available in a number of different section diameters: 19mm diameter - Rooster added this size to their range to give more room in your hand to hold the sheet. 22mm diameter - The most popular and...

The Optiparts Optimist Economy Top Cover is the best value top cover - still made with the strong, long-lasting materials. Features Low cost optimist top cover 100% water resistant but not breathable Specifications Material: 600D PVC coated...

High-strength Pivoting Lead Blocks with cams are used for halyard controls on larger keelboats and as "head knockers" on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as classic models, making...

  Coated fabric storage bag, impervious to UV-rays, fitted with clips for attachment to pulpit.  

RS Pico 1.09 m² rolled job in blue and white made from Dacron including sail bag. Specifications Colour: Blue

Perfect for today’s cruising yachts up to 35’ and racers up to 27’ to suit ropes from 6mm - 12mm.    

Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

Barton furling drum 42335 for use on Jibs fitted to dinghies, catamarans and day boats. Use in conjuction with Barton Furling Top Swivel part no 42336.  Suitable sail areas up to 100 sq ft (9.29 sq m) Features For sail areas up to 100 sq ft (9.29...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Rooster Topper Under Cover 1680D Polyester. Features Very high wearing, super tough material. Our undercover has a deep bow section so when traveling the bow section can't lift off and flap around. Deep sided cover for extra protection, two part clip...

The Barton 25100 genoa car is designed to run on 25mm (1") 'T' track. Manufactured from high quality marine grade aluminium and finished with Barton's unique 'Spectro' grey anodised finish for added protection. Features 'Spectro' grey anodised...

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

Optiparts ILCA Laser GRP Rudder Head fitting including Pivot Bolt. Compatible with all ILCA and Laser Rigs - Schools or Club version. Not approved for ILCA official events. Specifications Aluminium/ Stainless Steel construction School/ Club...

This foil bag carries the Laser® daggerboard and rudder in a snug zipped up bag and has the added feature of a mesh pocket on the side to hold all your ropes. Also with a side pocket for your Rooster tiller & extension. Dimensions Length ...

An ultra stiff, lightweight 20 mm carbon tiller extensions from Windesign including a rubber tiller joint with rope core, releasable base with pin and tubing, and fitted with x-gripped heat shrinkable tubing. Pefect for ILCA and Laser class and other...

The Barton Size 2 Deck Organiser (4 Sheave) is designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodised finish. Sheaves are from moulded...

Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...

The patented T2 Ratchamatic is Harken’s newest block to feature the T2 line’s styling and soft-attachment system. The weight of this high-strength block is only a few ounces. This is thanks to composite fiber-reinforced sideplates,...

Plastimo Top Halyard Swivel 58248 for  Plastimo Furling  Models 608, 609, 810 & 811

The Harken Classic Thru-Deck Block takes 12 mm rope only and is suitable for sailing dinghies or smaller yachts. The plastic is made from UV resistant materials while the stainless steel frame provides more support for extra strength. Sailing Blocks from...

High-strength Pivoting Lead Blocks with cams are used for halyard controls on larger keelboats and as "head knockers" on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as classic models, making...

This Lewmar 200mm (8") Locking Winch Handle is made from durable, lightweight alloy. Ball bearings provide maximum efficiency.

Harken Clamp with Screws Kit HFG697 Suits Harken Roller Reefing Unit 2 MKIV Jib Furling System No. 7412.10 Included  1 x Clamp H-42346 4 x Clamp Screw (M6 x 1 x 16MM SHCS)HFS747

Lewmar Synchro Footblocks feature alloy cheeks, fixing isolators, and a moulded base plate to prevent sealant ingress into the sheave. Features Standard and jammer options can be double stacked Two-step jammer action keeps lever close to side of the...

Lewmar bag of 100 replacement Torlon balls to suit Lewmar travellers.  This bag features size 2 (7.8mm - 5/16") Torlon balls.

Ready to go, ILCA Outhaul Mast Strop in 4mm D12 Marlow Dyneema and with 2 spliced-in Harken 29mm carbo pulleys Features 2 x Harken 29mm Carbo Blocks Overal length 33cm Marlow 4mm D12 Dynema  Eye splice for goose neck attachment

Laser Vago Gennaker Pole as supplied by Laser UK. Comes with end caps and fittings. Specifications Material: Aluminium Laser part no: 89803

Low-friction Bullet Blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Specifications Sheave diameter: 1...