SAILBOATS & PARTS
-
Rooster Laser Mast Teflon Disc
Rooster
Current Stock: 28£7.65Just a small teflon disc to drop into the mast hole, soft enough to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the boat. Specifications Disc diameter 60mm Suitable for classes Laser Thickness 1mmROOSTER-100649£7.65 -
RS Bahia & Pico Transom Flap, Attachment Plate
RS Ocean Play
Current Stock: 10£7.65Plastic mounting plate to attach drainage flaps on RS Pico and Bahia Sail Boats - Formely Laser Pico and BahiaRS-OPM-HF-501£7.65 -
Spinlock BE12 Bulleye with Twin Fixing
Spinlock
Current Stock: 12£7.65For max 12mm lines. - For guiding lines between two fixed points with little horizontal or vertical deflection- Guides extra lines to the cockpit cleats and clutches when no organiser sheaves are available- Double screw fitting- Stainless steel rope...SPINLOCKBE12/TF£7.65 -
Spinlock Label Set for Clutches - X-LBL
Spinlock
Current Stock: 4£7.65Available in English, French and German for XAS, XA and XT ClutchesSPINLOCKX-LBL£7.65 -
Barton Downhaul Block - N00110 - 20mm
Barton
Current Stock: 13£7.59Barton Single Block suitable for the 2 x Topper Downhauls Blocks attached onto the carbine hook at the bottom of your downhaul. Topper or Topaz Downhaul Block with 20mm sheave for use as a micro block around smaller pleasure dinghies. Suits up to...BN00110£7.59 -
Barton Clevis Pin (x2) - 5mm x 33mm
Barton
Current Stock: 15£7.52Barton Clevis Pin in 316 stainless steel and sold in packs of 2.Suitable for use in sailing parts and dinghies. - 316 Stainless Steel- 2 per pack- rings sold seperately- Dimensions: 5mm x 33mmB60208£7.52 -
RWO Screw Bung & Socket & Seal - Pack of 2
RWO
Current Stock: 47£6.83RWO screw-in black drain bung and socket - Suits Laser and many other sailing dinghies Dimensions Aperture 17mm Cut out 22mmRWOR2066£6.83 -
RWO Screw-in Dinghy Bung - Pack of 2 Black
RWO
Current Stock: 85£6.83RWO R2067 screw-in black drain bung, suit fitting R2066 - Popular fit to many dinghies including Laser and ILCA Dimensions Aperture 17mmRWOR2067£6.83 -
Harken Bullseye Fairlead 339 - 19mm
Harken
Current Stock: 2£6.79Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1/4" (6 mm) Fastener spacing: 0.71" (18 mm) Fasteners: #8 RH inch (4 RH mm)...HK339£6.79 -
Harken Micro Wedge Kit 297
Harken
Current Stock: 4£6.79Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 gHK297£6.79 -
Laser Pico Mainsheet Pad eye Deck Fitting 91303
Laser Performance
Current Stock: 1£6.79The Laser Pico Mainsheet Padeye 91303 is the official deck fitting made in stainless steel from Laser Boats. Dimensions Width 35mm Length 40mm Height 25mm Fasteners: 4 x 5mm countersunk Material: S/SLS-91303£6.79 -
Optiparts Optimist Losse Ring Mast Sleeve - 45mm
Optiparts
Current Stock: 4£6.79This mast sleeve is fitted around the mast at deck level and protects the mast from wearing. Optimist mast sleeve as supplied with Blackgold masts. Mounting the sleeve You will notice the sleeve is slightly smaller than the mast. To mount the sleeve you...OPEX1211£6.79 -
Optiparts Optimist Pin Stop for Blackgold Mast - Black
Optiparts
Current Stock: 3£6.79Replacement pin stop as used on the Blackgold mast for Optimist. Provides more effective Optimist downhaul function for Blackgold mast. Specifications Material: Aluminium Colour: Black Hole for mounting: 3 mmOPEX1337£6.79 -
RWO R0844 – XTEN Omniflex Tiller Joint - Suits ILCA Laser
Laser
Current Stock: 124£6.79High quality, reliable RWO OmniflexTiller Joint to suit most dinghy tiller extension, including ILCA Laser, Topper, and many others. This Omniflex joint is made from Elastomeric polymer which allows all directional flexability. The fitting includes a...RWO0844£6.79 -
Barton Size 2 Curved Back Plate Block
Barton
Current Stock: 7£6.05The Barton Size 2 Curved Back Plate Block is designed for small to mid range vessels and come with nylon sheaves suitable for all ropes including braided dyneema. Newly designed for 2019 onwards the Barton Blocks are known as great value for money...BN02161£6.05 -
Barton Clevis Pin (x2) - 5mm x 24mm
Barton
Current Stock: 20£6.04Barton Clevis Pin in 316 stainless steel and sold in packs of 2.Suitable for use in sailing parts and dinghies. - 316 Stainless Steel- 2 per pack- rings sold seperately- Dimensions: 5mm x 24mmB60207£6.04 -
ILCA Laser Lower Mast Base Plug - Fits ILCA 4 &7, Laser 4.7 & Full Rig
ILCA
Current Stock: 7£5.94Lower mast, base plug to suit ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4926£5.94 -
Holt Laser Rudder Retaining Pin with Cord 70141
Holt
Current Stock: 3£5.94ILCA or Laser tiller retaining pin to secure the tiller to the rudder head, supplied with securing cord Note If your tiller is not drilled to receive the retaining pin, ensure the tiller is firmly pressed into the head before drilling the location hole...HT70141£5.94 -
ILCA Laser Bow Eye Fairlead - ILC5910
ILCA
Current Stock: 2£5.94Standard Bow eye fairlead for all Laser and ILCA rig sail boatsILC5910£5.94 -
ILCA Laser Heavy Duty Eye Strap for Boom Blocks ILC318HD
ILCA
Current Stock: 28£5.94ILCA /Laser Boom Block Stainless Eye Strap 40mm Hole Centres For attaching both blocks to ILCA / Laser booms Fasteners Use 2 x 4.8mm x 12mm Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents...ILC4937£5.94 -
ILCA Laser Lower Mast Bottom Plug - ILCA 6, Laser Radial and Pico Only
ILCA
Current Stock: 9£5.94Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...ILC4626£5.94 -
ILCA Laser Rudder Gudgeon
ILCA
Current Stock: 18£5.94Genuine ILCA Rudder Gudgeon asteners 4 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereILC5950£5.94 -
Optiparts Halyard Block - 22mm
Optiparts
Current Stock: 2£5.94Plain bearing halyard block as used on Optimist School mast. Specifications Cheek material: Stainless steel Sheave material: Nylon Sheave diameter: 22 mmOPEX1330£5.94 -
Optiparts Optimist Fixed Base Mainsheet Block Plate
Optiparts
Current Stock: 2£5.94Made from stainless steel 316 fixed base plate to mount a mainsheet block in the Optimist. Specifications Material: 316 Stainless steelOPEX1412£5.94 -
Plastimo Flat Spreader Boot 4 mm - 6 mm
Plastimo
Current Stock: 10£5.94The white PVC protect your sails from chafing at cross trees and help foot of genoa over stanchions when sheeting in. Features White PVC anti-chafe covers Easy fitting, even after the mast has been stepped Suits a flat spreader (up to 30 mm x 10 mm) ...P17060£5.94 -
Ronstan 738 Dinghy Bung
Current Stock: 100£5.94Ronstan Screw-in Drain Bung suits Topper and Topper Topaz Sailboats and many other dinghies Features Water tight seal Retaining legsManufacturer: Ronstan RF738OPEX738£5.94 -
Sowester 316 Stainless Rigging Screws - Fork Ends
Sowester
Current Stock:£5.94 - £374.99Sowester 316 Stainless Rigging Screws with clevis pin, fork ends, available in sizes from 5mm - 14mm - These are general purpose rigging screws with many applications from boats rigging to decks and balcony rails. The rigging screw size is normally taken...£5.94 - £374.99 -
Spinlock BE10 Bulleye with Twin Fixing
Spinlock
Current Stock: 11£5.94For max 10mm lines. - For guiding lines between two fixed points with little horizontal or vertical deflection- Guides extra lines to the cockpit cleats and clutches when no organiser sheaves are available- Double screw fitting- Stainless steel rope...SPINLOCKBE10/TF£5.94 -
Barton Clevis Pin (x2) - 5mm x 18mm
Barton
Current Stock: 27£5.72Barton Clevis Pin in 316 stainless steel and sold in packs of 2.Suitable for use in sailing parts and dinghies. - 316 Stainless Steel- 2 per pack- rings sold seperately- Dimensions: 5mm x 18mmB60204£5.72 -
ILCA Laser Downhaul Secondary Line - 2.95m
ILCA Laser
Current Stock:£5.13Standard length ILCA Laser XD Secondary Line Downhaul made from Marlow Excel Control Line giving perfect control with low stretch and smooth tension and release movements. For 6:1 system Features Smooth cover giving low friction through the...LSM-30008£5.13 -
Holt Laser Rudder Gudgeon - Suits all Rigs
Holt
Current Stock: 7£5.08Laser Rudders Gudgeons by Holt - 2 Required per boat Fasteners 2 x Sowester Pan Head Self Tappers per Gudgeon - Size 8 x 1 1/2" Select size hereHT911201£5.08 -
Optiparts Optimist Bolts and Nuts for Rudder Fitting - Set of 12
Optiparts
Current Stock: 4£5.08Optiparts Optimist Bolts and Nuts for Rudder Fitting. Set Includes 12 bolts and self-locking nuts 6 for mounting the Optimist gudgeons 6 for mounting the rudder clip and rudder pintlesOPEX1155£5.08 -
Optiparts Optimist Halyard Sprit Handle
Optiparts
Current Stock: 4£5.08Features Nylon sprit adjuster handle with hole for 4 mm rope For easier handling of the halyard Designed for optimist sailing dinghiesOPEX1354£5.08 -
Optiparts Spring Clip for Trolley Wheel Retainer - R Style
Optiparts
Current Stock: 38£5.08An Optipart Trolley Wheel Clip in R-Pin style to secure the trolley wheel onto your Oppie trailer. Specifications Material: Stainless steel Style: ROPEX10790£5.08 -
RWO Bayonet Dinghy Drain Bung - Pack of 2 White
RWO
Current Stock: 27£4.78RWO 2064 bayonet style white drain replacement bung for R2060 Dimensions Aperture 17mm Cut out 22mmRWOR2064£4.78 -
ILCA Laser Dyneema SK78 Primary Line Blue 4mm x 1.3m Outhaul/Vang/Downhaul
Laser
Current Stock:£4.70Laser Primary Control Line in Marlow Excel D12 Dyneema SK78. Features High strength 12 Strand Easy to splice Low water absorption Superb low stretch for precision control Specifications Material: Dyneema Colour: Blue Pre-cut diameter: 4 mm Length: 1.3...LSM-30000£4.70 -
Barton Clevis Pin Ring - Medium x 10
Barton
Current Stock: 9£4.61The Barton Clevis Rings suit the Barton 5mm Clevis Pin range whoever they can fit onto any clevis pin from any manufacturer.Specs- to fit Barton Clevis Pins 5mm- Pack of 1- 316 Stainless SteelB60191£4.61 -
ILCA Laser Harken Clevis Pin 3/16" - Used on Harken Vang Block
ILCA
Current Stock: 30£4.61Harken SP004 3/16" x 3/4" Stainless Clevis Pin used for the top connection on Harken Laser Vang BlockHKSP004£4.61 -
Laser Rivets 2 Pack
Laser Performance
Current Stock: 2£4.28Laser Rivets pack for use with pop style rivet gun. Sold in 2.LSI-40000£4.28 -
Launching Trolley Nylon Wheel Washers - Pack of 2
Laser
Current Stock: 73£4.27Sowester nylon launching trolley wheel washers suitable for Laser/ ILCA stacking trollies and others dollies or trailers with 25mm axle diameter - Pack of 2 Features Heavy Duty 27mm Inside diameter to suit 25mm axles 2 Washers required...SOW2327£4.27
Laser boats & parts, sailing blocks & pulleys, dinghy parts, sails, spars, rigging and sailboat parts and equipment. CH Marine is the official Laser supplier for Ireland and Northern Ireland and we offer expert advice and service.
