Rule Mate 1500 Bilge Pump - 12v

Rule Automatic RM1500A bilge pump eliminates the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 ½ minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2 ½ minute check cycle. The automatic pumps feature two positive leads: an automatic (brown) and a manual override (brown with a white stripe)

Features

• Fully automated bilge pump with integral float switch.
• Includes level sense technology with fail-safe backup mode
• For medium sized yachts, motor cruisers and smaller commercial craft
• Tough plastic body.
• Quick release inlet strainer allows rapid cleaning.
• Low amp draw conserves batteries.
• Ignition protected

Specification

• Connections: For 25mm & 28mm (1" & 1 1/8") bore hose.
• Dimensions: 150mm long, 150mm high, 110mm wide.
• Fuse Size: 9(amp)
• Output: Up to 95 litres/minute (21 gallons/minute).
• Discharge Head: Max. recommended discharge head 2m.

Panel Switches

This is a 3 Wire pump - Use a 12 volt 3 Way Panel Switch to complete the instal  - See Related Products