Rule LoPro Bilge Pump LP900S - Automatic 12v

The Rule LoPro LP900S is a totally versatile and innovative design and comes with an adjustable outlet and inlet, so that you can suck up water from a lower position in the bilge. Its compact shape allows it to fit the tight the spaces often found in modern bilge designs

Automatic Modes

The Model LS900S is the automatic version and has 3 Operation Modes:

• High water mode; The pump starts when the water level reaches 50mm (2")
• Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
• Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.

Features

• Brings Rule pumping power to tight spaces
• 3 Automatic operational modes
• Low profile drains bilges lower
• Fully rotating discharge body for installation flexibility
• Choice of discharge ports supplied with each pump
• Horizontal or Vertical mounting
• Ignition protected

Panel Switches

This is a 3 wire pump and requires am On-Off-Auto Panel Switch to complete the install - See Rule Switches No 41 & 43 in Related products

Specifications

• Voltage: 12 V DC
• Capacity: 900 GPH (3407 LPH)
• Fuse Size: 7.5
• Amperage @12V: 4 A
• Amperage @13.6V: 5 A
• Replacement Strainer: 1230R
• Height: 2.4" (60 mm)
• Width: 2.4" (60 mm)
• Hose Diameter: Multiple
• Output: Up to 56 liters/minute (12.5 US gallons/minute).
• Discharge head : Maximum recommended 3 m
• Weight: 0.7 kg

Spare Parts and Accessories

• Rule Panel Switches: Nos. 41 & 43

See related products