Description
Rule Automatic RM2000A bilge pump eliminates the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 ½ minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2 ½ minute check cycle. The automatic pumps feature two positive leads: an automatic (brown) and a manual override (brown with a white stripe).
Features
- Fully automated bilge pump with integral float switch
- Includes level sense technology with fail-safe backup mode
- For medium sized yachts, motor cruisers and smaller commercial craft
- Tough plastic body
- Quick release inlet strainer allows rapid cleaning
- Low amp draw conserves batteries
- Ignition protected
Specifications
- Connections: For 25mm & 28mm (1" & 1 1/8") bore hose
- Dimensions: 150mm long, 150mm high, 110mm wide
- Fuse Size: 15(amp)
- Voltage: 12v
- Output: Up to 120 litres/minute
- Discharge Head: Max. recommended discharge head 3m
Panel Switches
This is a 3 Wire pump - Use a 12 volt 3 Way Panel Switch to complete the install - See Related Products