Rocna Original Anchor - Galvanised

The Rocna Anchor is a trusted and tried primary anchor that consistently tests ahead on many other premium anchors. It is a true multi-purpose anchor that sets and holds in most sea beds, from soft mud to hard sand and clay, and its chisel ended fluke easily penetrates grasses and sea weeds.

New Generation Design

Rocna has led worldwide anchor tests as published in the likes of SAIL, Yachting Monthly, Practical Boat Owner, Voile, and others. Because of the Rocna’s reliable and convincing performance against its competition, Rocna is trusted to be rock solid in the real world. You don’t need to take our word for it.

Precision Setting &  Rock Solid Holding Power

The distinctive Rocna Roll-bar (A) ensures that the anchor always arrives at the ideal angle for penetration, and the setting skids (B) guide the fluke tip (C) which acts as a sharp chisel cutting into the seabed. With a third of the anchor’s weight on its fluke tip, an instant reliable set is ensured with every use.

Of all anchor types, a concave fluke (D) gives the greatest resistance, and through clever design, Rocna provides the largest fluke area possible. In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocna’s chisel tip (C) ensures that it cuts through and bites deep.

Of all anchor types, a concave fluke (D) gives the greatest resistance, and through clever design, Rocna provides the largest fluke area possible. In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocna’s chisel tip (C) ensures that it cuts through and bites deep.

A size to suit all vessels

Rocna anchors are available in 14 sizes from 4 kg (9 lb) – 275 kg (606 lb) to suit all vessels from small boats to small ships. Sizes up to 33kg are stocked normally and sizes above are to order

Video 

Please go to our Video Tab and take a look at the excellent presentation that fully explains the amazing design and features of the Rocna Anchor

Anchor Sizing Guide 

This Guide covers both the Rocna Original and Vulcan Anchors. To choose the correctly sized Rocna or Vulcan anchor, find your vessel’s length from the column on the left, then track across that row until you find the first column with a displacement (in tonnes) the same or larger than the displacement of your vessel. The top of the column with the selected displacement indicates the recommended Rocna or Vulcan anchor.

Rocba's Anchor Sizing is Conservative

Unlike other manufacturers, Rocna's anchor sizing recommendations are intended to provide an anchor adequate for use in most all conditions. They base their calculations on 50 knots of wind, associated surge, and poor holding bottoms. This chart is a guideline only, vessel owners should satisfy themselves that their choice of anchor is sufficient and suitable 

Should further help be needed please contact our sales team