Polyform Yellow EVA Solid Foam Mooring Buoy - MR40 285 x 545cm

The Polyform MR40 Mooring Buoy is a heavy duty mooring buoy, ready assembled with an iron centre rod, with eye on the top end and swivel on the bottom end. The buoy is manufactured from ethylene vinyl acetate (EVA) to Polyform’s in-house developed raw material recipe. The outstanding elasticity of the Bacell™ material provides buoys that have the highest resistance to shrinkage, permanent deformation and breakage. The rod and the swivel at the lower end are hot dipped galvanized. Upper part and the grip ring on top of the iron are coated with a dark blue plastic material.

Note 

Only the swivel (below water) shall be used for mooring. The upper grip-ring isfor boat hook retrieval and temporary holding in light conditions.

Specification

• Weight (nominal) 2.65 Kg
• Gross volume 14.0 L
• Recommended max load 7.5 Kg
• Material EVA

Dimensions