Description
The POLYFORM® MB-series buoys are rotomolded from polyethylene (PE) and filled with polystyrene foam (EPS), guaranteeing a compressive strength of 5 mH2O and a density of 250kg /m3. The buoys come complete with hot dip galvanized armature and swivel. Only the lower swivel (under water) shall be used for mooring. The MB-series buoys are mainly used for mooring, marking of fishing gear and cables, pipelines, and different other surface installations. Do not expose the buoy to a load of more than 60% of its total buoyancy. All moorings shall be checked for wear and tear at least once a year.
Specification
| Model | Volume | Total Weight | Net Boyancy | Length of Buoy | Overall Length | Dia. of Buoy | Dia. of Rod |
|---|---|---|---|---|---|---|---|
| MB100 | 106L | 12.5kg | 94 kg | 59 cm | 92 cm | 50 cm | 19 cm |
Mooring Usage
Only the lower swivel shall be used for mooring. Do not expose the buoy to a load of more than 60% of its total buoyancy. All mooring shall be checked for wear and tear once a year.
Related Products
Related Products
Norfloat MB-120 Rigid Mooring Buoy - Foam Filled
Polyform
Polyform Mooring Dahn Buoy
Polyform
Polyform Yellow EVA Solid Foam Mooring Buoy - MR40 285 x 545cm
Polyform Yellow EVA Solid Foam Mooring Buoy - MR30 250 x 505cm
Polyform CCE4 Mooring Buoy with Galvanised Centre Rod
Polyform
Polyform CCE3 Mooring Buoy with Galvanised Centre Rod
Polyform
Polyform Fender Buoy A0 - Yellow (30")
Polyform
Polyform Fender Buoy A5 - White (100")
Polyform
Polyform Marker Buoy A2 - Yellow (50")
Polyform
