Plumbing - Corrosion Resistant Metals

Stainless steel key to open Plastimo Deck Fillers with two hole, key points Dimensions Studs at 30mm Centres 

Maestrini marine grade bronze deck filler /plate 2021L ,accept 2 1/2" BSP Hose tail for hose and also suitable as an access to emergency through deck, tiller access. Specifications Material: Bronze Thread Size: 2 1/2" BSP Overall Diameter:...

High quality marine bronze deck plate with 135mm clear opening - High stength for a working deck and used for hand access to under deck equipment such as fuel tanks and emergency tiller connections Specification Material- Bronze Thread Size 5"...

Plastimo Aqua Stop quick fit, water hose connector,with non- return valve to suit  hoses Ø 12, 15 and 19.   Features  Disconnect from the marina circuit in a click. Quick-fit connector in nickel plated brass, compliant...

Corosion resistant brass 'Y' fitting. 

Roca Deck Filler Waste Pump-Out Adaptor with  Roca Waste Deck Filler Cap  For use with the Roca Stainless Steel Deck Fillers 38mm & 50mm See here      

Roca premium quality waste water filler cap for use in conjunction with Roca deck filler fittings. Featuring an intergrated opening key and elegantly-cast in electropolished, stainless steel, this deck filler cap has an elegant look and will suit...

Plastimo high quality, reinforced nylon thru hull skin fittings with polished stainless outer flange and ribbed hose tail. Made from glass reinforced (20 %) polyamide with over moulded 316 L stainless steel flange. These skin fittings give are very...

Plastimo high quality, reinforced  nylon thru hull skin fittings with polished stainless outer flange and ribbed hose tail. Made from glass reinforced (20 %) polyamide with over moulded 316 L stainless steel flange. These skin fittings give are...

Plastimo high quality, compact nylon thru hull skin fittings with ribbed hose tails. For above waterline use on boats Features  Available sizes 20mm (3/4"), 25m (1") & 38mm (1 1/2") UV resistant Always bed /seal a thru-hull with suitable...

Plastimo high quality, White 90° elbow vent. Dimensions   A: 16-19 mm C: 68 mm D: 43 mm B: 41 mm E: 40 mm F: 59 mm

Plastimo high quality, compact nylon thru hull skin fittings with ribbed hose tails. For above waterline use on boats Features  Available sizes 20mm (3/4"), 25m (1") & 38mm (1 1/2") Allows major room saving, as they can be used with a hose...

Maestrini heavy duty,  fully threaded, thru-hull skin fittings in gunmetal bronze, Alloy CB491K. These are commercial grade skin-fittings with extra length to cover heavier thickness hulls. Sizes 1" BSP 1 1/4" BSP 1/1/2" BSP 2"  BSP ...

Nuova Rade Self Drain Socket for Inflatable Boats - 68mm Thru-Hull with non-return valve on outboard end Features Nuova Rade Product Number: 43242 Material: PA Colour: Black Non-return outlet Specifications C: 107mm E: 94mm H:115mm ØA: 68mm...

Female BSP threaded end caps,manufactured in CW602N alloy

The Maestrini Stainless Steel Handle for 5140 is pictured here with the Maestrini Ball Valve 5140. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in...

Maestrin Ball Valves, manufactured CW602N corrosion resistant brass with AIS 316 stainless steel handles - Made in Italy These high grade marine ball valves, or lever valves as they are also known are suitable for all through hull seacock...

Heavy duty full CR brass F.F. ball valve full bore with Dacromet coated handle. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are...

Stamped Roca Fresh Water Deck Filler Cap with handle. The cover complies with standards: ISO 8099 (ISO 4576), ISO 11192, ISO 9093-1. Use for body: 421438-421439 and 421451-421452. Polished stainless steel unleaded fuel caps with flush handle to suit...

Stamped Roca Diesel Deck Filler Cap with handle. The cover complies with standards: ISO 8099 (ISO 4576), ISO 11192, ISO 9093-1. Use for body: 421438-421439 and 421451-421452. Polished stainless steel unleaded fuel caps with flush handle to suit Roca...

Stamped Roca Unleaded Deck Filler Cap with handle. The cover complies with standards: ISO 8099 (ISO 4576), ISO 11192, ISO 9093-1. Use for body: 421438-421439 and 421451-421452. Polished stainless steel unleaded fuel caps with flush handle to suit Roca...

Seabung the award winning, patented system for repairing or changing seacocks at sea. Sold in pairs (1 x 60mm and 1 x 90mm). Using hi-tech materials and revolutionary design, Seabung introduces a quick and simple way to change your Seacocks while...

CR Brass Water Strainer - Venezia. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

Maestrini corrosion resistant brass plug with male thread. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

Equal BHP socket connector in Maestrini CR Brass with female - female ends. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are...

Maestrini CR Brass Male - Male Reducer. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

Maestrini CR Brass male to female reducer. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

Double sided male threaded connector joint or hexagon bushings. Made from corrosion resistant brass. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products...

Brass Tee Piece with three female ends. Manufactured in high quality CW602N corrosion resistant brassManufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products...

The Maestrini Elbow Fittings are designed for freshwater marine systems that require low corrosion fittings. Specifications Manufactured in high quality CW602N corrosion resistant brass Manufactured in CW602N alloy: a dezincification resistant brass...

Female to Female threaded CR Brass connecting joint for plumbing. CR Brass is much more resistant to corrosion over time than normal brass. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion...

Maestrini Hose Tails in CR resistant brass, threaded male BSP in a variety of size and hose combinations  CW602N Corrosion Resistant Brass CW602N Alloy is Dezincification Resistant Brass considered equal to bronze in marine corrosion resistance...

Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.Certified ISO 9001:2008 from Lloyd’s Register.Maestrini -...

Maestrini CR Brass Skin Fitting (Max Hull Thickness 40mm). Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'...

Corrosion Resistant Brass Skinfitting with Hose Tail. Manufactured in CW602N alloy: a dezincification resistant brass considered equal to bronze in marine corrosion resistance and durability. Products made in this alloy are clearly stamped 'CR'.

The KM fittings below are moulded in off white Nylon, a strong, stable material unaffected by extreme temperature. Select sizes from: 12mm (1/2"), 19mm (3/4", 25mm (1") and 38mm (1 1/2"). Specifications   12mm Hosetail - 1/2" thread BSP 19mm...

This fitting is required when using Deck Filler Body 47420 for Waste Pump Out.    

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 38 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 25 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...

The Jabsco Bilge Strainer is an inline filter that stops debris from entering the pump and jamming the action. This bilge pump filter connects onto 19 mm hose before the pump inlet and is recommended for all manual pumps. Stop bilge debris from blocking...