Description
Fuel Flow Sensor for Gasoline only. One required per engine. Up to 3 engines supported.
Information Outputs
- Fuel Flow
- Tank Fuel Used
- Trip Fuel Used
- Seasonal Fuel Used
In the Box
- Fuel Flow Sensor
- NMEA2000 Tee Connector
Specifications
- Cable Length: 10 Ft
- Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
- Flow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
- Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
- Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
- Package: The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clamps
- Fuel Type: Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems.
- Hole required to route through a bulkhead: 22mm (7/8")
- Multiple Fuel Flow sensors possible: Yes