MG Duff EE3 Electro Eliminator No. 3 - Shafts between 80 to 200mm

Shaft earthing assembly for propeller shafts between 80mm to 200mm diameter. Does not include mounting bar.

Whether your boat is steel or GRP, to provide the best protection to the stern gear the shaft should be fitted with an MGDUFF Electro Eliminator Brush assembly.

The MGDUFF Electro-Eliminators offer the most effective shaft bonding solution. Running directly onto the propeller shaft the electro eliminator puts the anode in constant low resistance contact with the propeller shaft.

The copper graphite brushes will give at least 2000 running hours under normal conditions. The electro eliminators will also remove the interference to electronic equipment caused by the rotating shaft.

Set up

• The MGDuff Electro Eliminator comes with the brushes detached
• Loosen the screws on both sides of the clamp and push in the brushes
• Secure by tightening the screws (included)