Network Systems

Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to...

Convert your compatible device’s network connector from the Garmin BlueNet™ Network to the Legacy Garmin Marine Network so it can connect to a compatible Garmin chartplotter. This cable does not replace the need to use a Garmin BlueNet™...

QUALITY SWITCHING. SIMPLE INSTALLATION. Get the integrated-boat experience with digital switching that allows you to operate onboard electrical functions right from your GPSMAP® or ECHOMAP™ chartplotter. Full NMEA 2000 connectivity to connect...

Use our cable connectors when wiring your marine Ethernet connection. Sold in packs of two. Compatible Devices ECHOMAP™ Plus 72cvECHOMAP™ Plus 72svECHOMAP™ Plus 73cvECHOMAP™ Plus 73svECHOMAP™ Plus 74cvECHOMAP™...

The Garmin GMS 10 Network Port Expander allows you to connect multiple chartplotters and sensors over the Garmin Marine Network. With this robust 100 MB switch, you can connect multiple MFDs and sensors to the Garmin Marine Network and gain the benefit...

Specifications Weight: 0,553 kg Dimensions: 17,152 × 20,328 × 17,152 cm Optional Extra SIMNET CABLE 5M NAV-24005845 SIMNET TERMINATOR NAV-24005894 SIMNET POWER CBL W/TERM 2M NAV-24005902 SIMNET MULTI JOINER 7-WAY NAV-24006298

SimNet 7 Prong Multi-joiner Specifications Weight: 0,998 kg Dimensions: 14,611 × 20,328 × 2,541 cm

SimNet power cable with terminator 2 m (6.6 ft) -red tip. Specifications Weight: 0,1 kg Dimensions: 20,328 × 29,222 × 0,025 cm

Featuring a built-in termination resistor, the Simrad SimNet Termination Plug must be installed at both ends of the network backbone. It is IP66 rated, meaning the unit remains safe from powerful currents. This watertight termination plug helps provide...

SimNet protection plug. Specifications Weight: 0,05 kg Dimensions: 10,164 × 15,246 × 0,025 cm

The Navico 3 Prong Multi-Joiner helps easily split or expand the Simrad SimNet network for a seamless connection between the systems. It can also be used in reestablishing the backbone of the SimNet, keeping the network intact. This Simrad tee joiner...

SimNet cable 5 m (16 ft). Specifications Weight: 0,299 kg Dimensions: 19,058 × 28,586 × 2,541 cm

SimNet cable 2 m (6.6 ft). Specifications Weight: 0,15 kg Dimensions: 10,164 × 10,164 × 2,541 cm

SimNet cable 0.3 m (1 ft). Specifications Weight: 0,05 kg

20 m (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) Specifications Weight: 0,522 kg Class Type: Network Components

35 m (115 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) Specifications Weight: 1,029 kg Dimensions: 20,328 × 90,206 × 5,082 cm

Micro-C female to SimNet 1m (3.2ft) cable that connects a NMEA 2000 product to a SimNet backbone. Specifications Weight: 0,05 kg Dimensions: 17,787 × 29,222 × 2,541 cm

SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000 backbone 0.5m (1.6ft). Optional Extra RS40 VHF Radio with AIS NAV-000-14470-001 Precision-9 Compass NAV-000-12607-001

Micro-C female to SimNet 4 m (13 ft) cable that connects a NMEA 2000 product to a SimNet backbone. Features Micro-C to Snet Specifications Weight: 0,193 kg Dimensions: 17,787 × 20,328 × 2,541 cm

This standard NMEA 2 Female Terminal is a light cable connector for one end of the backbone of the eletronics network. Sold singly.Used for the installation and setup or marine electronics including Garmin GPS systems. Compatible Devices Compact...

This standard Garmin NMEA2000 Male Terminator is a light cable connector for one end of the backbone of the NMEA2000 network. Sold individually  Compatible Devices Compact Reactor™ 40 Hydraulic Autopilot Starter PackCompact Reactor™ 40...

Add components to your NMEA network by installing the Garmin NMEA2000 T-connector on your existing backbone cable. Compatible Devices Compact Reactor™ 40 Hydraulic Autopilot Starter PackCompact Reactor™ 40 Hydraulic Autopilot with GHC™...

Garmin's NMEA2000 starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes NMEA2000 Backbone / Drop cable (x1 6m and x1 2m cable) , power cable (2 m), x2 T-connectors, and a pair of male and female...

Use Garmin's Inline Terminator between the backbone cable and your compatible device to correctly terminate the network. Features Type: Terminator Series: NMEA 2000 Compatible Devices Compact Reactor™ 40 Hydraulic Autopilot Starter PackCompact...

Use Garmin's Male NMEA2000 Field-Installable Connectors to create custom-length drop cables and backbone extension cables. These NMEA2000 connectors also can be used to shorten any NMEA2000 drop/backbone cable. In The Box: NMEA 2000 drop cable (2...

Marine Heading Sensor NMEA 2000 - 6M Cable Features Connect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable Compatible Devices GMR™ 18 HD+GMR™ 18 HDGMR™ 18 xHDGMR™ 24 HD RadomeGMR™ 24 xHD GMR™ 24...

Supply power to your NMEA 2 network with Garmins 6 foot (2 m) power cable. Compatible Devices Compact Reactor™ 40 Hydraulic Autopilot Starter PackCompact Reactor™ 40 Hydraulic Autopilot with GHC™ 20 and Shadow Drive™ Technology...

Extend your NMEA2000 system with Garmin backbone/drop cables (different sizes sold separately).