Laser Vago

Laser Bahia / Vago mast jib sheave box with nylon pulley  90623 - (Selden 505-071-01 )

The Laser Vago Mast 89007 is fully rigged mast complete with all fittings, halyards, standing rigging wires and spreaders.

Replacement Mast for the Laser Vago sailing dinghy without rigging included.

The Laser Vago Race 9.31 m² rolled mainsail with clear Mylar panels including long sail bag. Specifications Material: Cear mylar Size: 9.31 m²

The Laser Vago Standard 7.56 m² rolled main sail with white panels and reefing points made from Dacron including long sail bag. Specifications Material: Dacron Panel colour: White Size: 7.56 m²

The replacement Laser Vago Boom fully rigged 

The Laser Vago Jib 2.78 m² rolled with white panels made from Dacron including long sail bag. Specifications Material: Dacron Colour: White Size: 2.78 m²

The Laser Vago Race Gennaker 12.07 m² rip stop nylon gennaker standard color is orange including sail bag. Specifications Material: Nylon Colour: Orange Size: 12.07 m²

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold seperately). Connection bolt supplied for the Vago Mast.

These combined swivelling deck fairlead and camcleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold seperately). For the replacement cleat on its own (See Code: LS-91484).

The replacement Halyard Bag to suit the Laser Vago sailboats.

Assembled ready to sail, rudder head, tiller, rudder blade and extension.

Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

The Laser Vago Toe Strap set is supplied in grey and includes two long toe straps and one short toe strap. Specifications Colour: Grey

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

A modern look. Performance you’d expect.The Laser Vago Sailboat offers a single-line launch and retrieval system for the gennaker as well as interchangeable sails that don’t require extra rigging. Its high boom, GNAV vang, and cockpit design...

A modern look. Performance you’d expect.The Vago offers a single-line launch and retrieval system for the gennaker as well as interchangeable sails that don’t require extra rigging. Its high boom, GNAV vang, and cockpit design support both...

The swivel to connect the Laser Bahia and Vago Jib Halyards to the decks.

This furling is the official direct replacement for the Laser Vago and Laser Bahia furling drums.

This Infused GRP centerboard is a multiboat centerboard that is compatible with both the Bahia and Vago. The replacement Centreboard for the Laser Bahia, Vago or L2. Constructed from GRP.

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The Vago/Bahia Boom inboard end to attach to gooseneck on mast of any Laser Bahia or Vago sailing dinghy, requires 3/16" x 5/8" stainless steel rivets. Specifications Rivet material: Stainless steel Number of rivet: 4

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats.Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until its put under...

The Pico Toe Strap plate is used to spread the load when attaching toe strap or MK1/MK2 Laser friction pad. Specification Material: Plastic Colour: Blue