Laser Spars & Fittings

The Laser Boom Vang Plate with Key Slot fits onto the boom and be used to attached the Laser Kicker system as a quick connect. Specifications Laser part no: 91535

The Laser Lower Section Mast Plug fits the Radial/Pico/Funboat dinghies. Features Fits the mast base (lower section) Specifications Laser part no: 90641

Laser Vago Gennaker Pole as supplied by Laser UK. Comes with end caps and fittings. Specifications Material: Aluminium Laser part no: 89803

The Laser Pico Mast Step fits the mast to the deck of your boat. 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black Laser part no: 91299

Description A set of Laser MK1 Battens to suit Laser Standard, Radial and 4.7 Sails. Features Old style design no longer used for racing events. 3 per pack (suitable for one sail) Strong and flexible plastic design Comes with batten caps to protect the...

Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  The Laser 4.7 Lower Mast is pre-bent with 5 degree angle as standard. Features Waterproof anodized aluminium Comes with gooseneck and...

Pair of mast rig support holders for ILCA Laser spars - Made in Foam these holders have slots to hold up to 5 spars. Placed on desk and under the cover these supports give good protection to you valuable spars.  

Complete package of Laser® and ILCA® protection for maststep, mast, tiller, outhaul and daggerboard. Contains 2 disks for the maststep, 2 stripes for the maststep and mast deck, 2 stripes for snug fit of the top mast section, 1 stripe for the...

Official ILCA Laser Composite Upper Mast.Approved for ILCA events, suiting all rigs ILCA4, ILCA6 & ILCA7. Also suitable for Laser 4.7, Radial & Full Rig. Specifications Material: Composite / Epoxy Length: 3.6 m

Element 6,  high performance ILCA6 composite lower mast section including lower mast plug, kicker and gooseneck fittings. These new ILCA masts are designed with the same bend and performance characteristics as the existing aluminum masts, they will...

Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

Lower mast, base plug to suit  ILCA 4 & 7 and Laser 4.7 and Full Rig Sail boats -Includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...

ILCA /Laser Boom Block Stainless Eye Strap  40mm Hole Centres For attaching both blocks to ILCA / Laser booms Fasteners Use 2 x 4.8mm  x 12mm  Stainless Steel Rivets We recommend using Duralac between rivets and spars - This prevents...

The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat with a fairlead to guide the rope into the teeth. The specially shaped base means the CL211 Mk1  means it can be fitted to either curved or flat surfaces The CL211 Mk1 has...

Just a small teflon disc to drop into the mast hole, soft enough to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the boat. Specifications Disc diameter 60mm Suitable for classes Laser Thickness 1mm

Features Top plug for Laser upper mast and end plug for outer boom end Replacement part for Laser sailing and sailing schools

Optiparts Bottom Mast Plug for Laser replacing the mast plug in your boat.

Optiparts Inner Boom End Plug for Laser.

Laser vang bracket for boom attachment, provides the attachment point for the boom vang key.

Optiparts Upper Mast Sleeve for Laser.

Optiparts Very strong alloy cleat in silver coated finish. Used as Laser outhaul and traveler cleat.

Very strong alloy cleat in hard anodised finish for Laser outhaul and traveler.

ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs Specifications Material: Stainless steel Fasteners 6 x M4.8 x 12mm Stainless Steel Rivets -...

Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded Specifications Material: Stainless steel Fasteners 4.8mm x 12.8mm Stainless Rivets

ILCA Laser Boom Plug - Inboard end to fit  boom to lower mast via gooseneck fitting. Use a 12mm x  Specifications Material: Plastic

Lower mast, base plug used on the ILCA6, Laser Radial, Funboat and Pico lower mast, includes grooved feature to prevent sand entrapment and wear on you boat. Important Fixed in place with 4.8mm countersunk head rivet - It is important to use a...

Fits the Laser Standard and 4.7 lower mast, plastic mast foot plug with moulded in sand grooves, change it regularly to protect your mast hole.

ILCA Laser Boom with Harken ball bearing blocks. Official ILCA approved for all ILCA events and suitlable for all Rigs- ILCA 4, ILCA 6, ILCA 7. Features Harken Boom End and  Centre MainsheetsBlocks fitted Official ILCA approved Suits All modesl...

This large blue plastic Laser Boom Fairlead has a stainless steel insert to reduce chafing and allow larger lines with heavier loads. Features Suits the topaz deck fairlead Requires 2 x screw (6 mm x 25 mm) Specifications Material:...

Anodized aluminium tube with end plugs and sleeve fitted. A direct replacement for the top mast that comes on your Laser 4.7, Radial or Standard rig. Suits all types of Laser sailing boat. The Laser Top Mast is too long for a regular courier so there is...

ILCA 4  Laser 4.7 bottom section is anodized aluminium tube including lower mast plug, kicker and gooseneck fittings.  ILCA Class Approved

ILCA 6 lower mast section in  anodized aluminium ,including lower mast plug, kicker and gooseneck fittings. Approved for ILCA Class events - Compatible with Laser Radial Rig  

ILCA 7 Laser lower mast section inanodized aluminium tube including lower mast plug, kicker and gooseneck fittings. Specification Material: Aluminium ILCA Class legal