Description
See Seaforce 30 for blue and black colours only. The Seaforce 30 & 60 antifouls are very similar to each other with Seaforce 60 lasting longer on vertical spaces.
Jotun SeaForce 30 Antifoul is suitable for commercial use on ships, fishing vessels and other commercial water craft made from steel, aluminium, GRP or wood. The Jotun Seaforce can be applied over other forms of Jotun antifouling without priming assuming the surface is dry and clean. If the hull has never been painted before you need to use Jotun Vinyguard as a primer.
Jotun Seaforce 30 is the optimal choice if you are looking for an excellent antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides to stop growth building up.
Recommended for under water hulls in newbuilding or drydocked boats. Designed for vessels traveling at a wide range of speeds and activities. The product can be used for long service periods of up to 60 months making it perfect for commercial activities.
- 30 months excellent antifouling performance: Jotun SeaForce 30 will provide an excellent antifouling performance at a budget friendly price due to its stable polishing rate and efficient biocide package.
- The cost base for SeaForce 30 is very attractive, allowing owners and operators to limit their antifouling cost, without compromising on quality.
- Proven performance: 60 million litres of SeaForce have been painted at more than 20,000 vessels since 2004.
- Maintain speed and schedule by limiting hull deterioration and friction
- IMO Anti-fouling System Convention compliant (AFS/CONF/26).
Specifications
- Application: Spray, Brush or Roller
- Coverage 3.3m² per litre
- Thinners: Jotun No.7 Thinners
- Recommended number of coats: 2
- Recommended primer: Jotun Vinyguard Antifoul Primer Grey
- Shelf life: 18 months
Substrate temperature | -10 °C | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
Surface (touch) dry | 5 Hours | 2 Hours | 1 Hours | 45min | 30min | 30min |
Dry to over coat, minimum | 48 Hours | 36 Hours | 12 Hours | 9 Hours | 7 Hours | 6 Hours |
Dried/cured for immersion | 48 Hours | 36 Hours | 12 Hours | 12 Hours | 10 Hours | 8 Hours |