Jabsco Oil Change Pump - 24V (8A)

Jabsco Oil Change Pump with reversible motor and a 24 V power supply.

The Jabsco Oil Change Pump is designed to be installed near a vessel's engine and permanently plumbed to the engine's oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve(provided) to guard against accidental oil discharge.

The Oil Change Pump is the same high-quality pump used in the Jabsco Multi-Engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes.

Features

• Reversing switch guard to avoid accidental activation
• Pump is reversible to both drain and refill engine oil
• Complies with USCG 183.410 and ISO 8846 Marine (Ignition Protected)

Specifications

• NPT male threaded fitting: 3/8"
• Self-priming: 3' (1 m) of lift
• DC voltage: 24 V
• Fuse size: 8 A
• Length: 7 7/8" (20 cm)
• Width: 3 3/4" (10 cm)
• Height: 4 7/16" (11 cm)
• Weight: 9 lb (4.1 kg)