International Woodskin Oil / Varnish - 750ml

International Woodskin Oil / Varnish is a one-component oil varnish hybrid which provides a natural looking semi-gloss finish. The microporous technology enables the wood to breathe. Woodskin is easy to apply and really penetrates into the grain providing a more flexible coating.

Features

• Its natural Teak colour showcases the beauty of any wood
• Suitable for use on all types of wood, including oily woods such as teak and iroko
• No need to sand between coats; will not crack or flake

Specification

• Brand: International
• Capacity: 750 ml
• Area: Above the Waterline
• Suitable for: Exterior Cabin/Trims, Interior Cabin/Trims
• Finish/Sheen:Semi Gloss
• Substrates: Wood
• Application method: Brush
• Recommended Number of Coats: 3
• Practical Coverage: 9 m²/L
• Typical Shelf Life: 2 Years

Preparation

WOOD PREVIOUSLY COATED WITH WOODSKIN OR SIKKENS CETOL MARINE: Clean thoroughly with mild detergent. Roughen the surface with a sanding pad, clean thoroughly with fresh water and allow to dry.

PREVIOUSLY VARNISHED WOOD: Remove all previous coatings. Follow directions for bare wood.

BARE WOOD/PLYWOOD: Woodskin has been developed for application direct to bare wood, without the need for special preparation. Sanding is not required prior to applying Woodskin. However, if preferred for aesthetic purposes, bare wood can be sanded smooth with 80-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. If applying to oily woods ensure the surface is adequately prepared and degreased. Thinner No.1 is recommended.

Method

Application (Brush)

Woodskin can be applied direct to bare wood or over-coated on to itself. Pour the amount you expect to use in a separate container. Apply a minimum of 3 coats using a brush; a long haired bristle brush is recommended for this purpose. Sanding between coats is not required. Allow 24 hours drying time in between coats. Thinning is not recommended.

Hints

• Mixing: Stir thoroughly before use.
• Thinner: Do not thin.
• Thinning: Not recommended.
• Airless Spray: Not recommended.
• Conventional Spray: Not recommended.
• Brush: Recommended.
• Roller: Not recommended.
• Cleaner: Thinner No.1

Hazard Warnings

Hazard Pictogram :
Signal Word:	Warning
Hazard Statements:	Flammable liquid and vapour Causes serious eye irritation Causes skin irritation May cause drowsiness or dizziness May cause damage to organs through prolonged or repeated exposure Harmful to aquatic life with long lasting effects
Precautionary Statement:	General: Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Do not breathe vapour. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	Hydrocarbons, C9-C11, N-alkanes, Isoalkanes, Cyclics, Solvent Naphtha (Petroleum), Medium Aliph.

Technical Files

Technical Data Sheet

Safety Data Sheet