International Original Yacht Varnish - 750ml

International Original is a traditional one-component general purpose amber gloss varnish, suitable for interior & exterior use. This product is an easy to apply, durable varnish.

Features

• General purpose gloss varnish with a high clarity finish for light colour woods
• Good flow, flexibility and gloss retention
• Suitable for interiors, exteriors and over existing varnishes

Specification

• Brand: International
• Capacity: 750ml
• Area: Above the Waterline
• Suitable for: Exterior Cabin/Trims, Interior Cabin/Trims
• Finish/Sheen: High Gloss
• Suitable Water Types: Sea Water, Fresh Water, Brackish Water
• Substrates: Wood
• Application Method: Airless Spray, Airmix, Brush, Conventional Spray
• Recommended Number of Coats: 3
• Practical coverage: 11.70 m²/L
• Typical Shelf Life: 2 Years

Preparation

PREVIOUSLY VARNISHED WOOD

• In Good Condition: Clean the surface with Super Cleaner. Sand smooth with 280­- 320 grade paper. Remove sanding dust with thinners. 
• In Poor Condition: Remove all previous coatings. 

BARE WOOD Ensure that the surface is thoroughly degreased. Sand smooth with 80­-180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. 

PRIMING BARE WOOD: Thin the first coat by 10­15% with Thinner No.1.

Method

Apply a minimum of 3 unthinned coats, more if using a roller. For best results sand smooth between coats with 320­400 grade wet or dry paper. Avoid using direct from the can. Pour the amount you expect to use in a separate container.

Hints

• Mixing Stir well before use.
• Thinner Brush ­ YTA800 Thinner No. 1. Spray ­ Thinner 910 or Thinner 920
• Cleaner Thinner No.1
• Roller If applying by roller, lay off with a brush or pad otherwise air bubbles may become trapped in the film.
• Airless Spray (Professional spray application only) Pressure: 176­210 bar. Tip Size: 1365­1580.
• Conventional Spray (Professional spray application only) Pressure: 2­3 bar. Tip Size: 1.1­1.4 mm. Thin 20­25% with Thinner 910 or Thinner 920.
• Airmix spray (Professional spray application only) Pressure: 2 bar. Tip Size: 06­113.
  For best results sand lightly between coats with 320­400 grade paper. Avoid using direct from the can. Pour the amount you expect to use in a separate container.

Hazard Warnings

Hazard Pictogram :
Signal Word:	Warning
Hazard Statements:	Flammable liquid and vapour May cause an allergic skin reaction May cause drowsiness or dizziness
Precautionary Statement:	General: Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients	Hydrocarbons, C9-C11, N-alkanes, Isoalkanes, Cyclics, <2% Aromatics Hydrocarbons, Terpene Processing By-Products.
Supplemental Label Elements	Wear appropriate respirator when ventilation is inadequate.

Technical Files

Technical Data Sheet

Safety Data Sheet