International Interdeck Non-Slip Additive - 20G

To create a highly effective slip-resistant finish, simply sprinkle this additive in topside finishes or onto wet paint. It doesn’t affect your drying times either.

Features

• Create a non-slip surface finish when added to or sprinkled onto paint
• It doesn’t affect finish drying times
• Allows you to apply your finish as normal

Specification

• Brand: International
• Capacity: 20G
• Area: Above the Waterline
• Suitable for: Deck
• Application Method: Brush, Roller, Conventional Spray
• Practical Coverage (Brush & Roller): 9.00 m²/L
• Practical Coverage (Conventional Spray): 6.00 m²/L

Preparation

All substrates must be clean, dry and free from contaminants

GENERAL APPLICATION

Mix­ing method-Add to topcoat and stir. Apply by brush, roller or spray

To Apply to Wet Paint -Apply one coat of topcoat. Apply Non­Slip Additive with a suitable dispenser or other dispersion method until desired grit onto surface has been achieved. Allow to fully cure and remove excess grit

Hints

• Mixing The amount to mix is dependent on the non­skid texture desired. Stir Non­Slip Additive into topcoat thoroughly
• Thinner Same as for finish
• Cleaner Same as for finish
• Ventilation and Humidity Control Ensure adequate ventilation during use
• Compatibility/Substrates Compatible with International Topcoats
• Coverage (Theoretical) ­ 10 m²/L per coat 8­12m²/lt when spread manually
• Application Methods Brush, Conventional Spray, Rolleror apply directly onto wet paint

Hazard Warnings