Description
International Danboline protects bilges, lockers and bulkheads against moisture penetration, and wear and tear. Danboline will resist oil and fuel spillage and cleans easily.
Features
- Hardwearing coating for bilges, lockers and bulkheads
- Chemical resistance to fumes, fuel and oil
- High opacity ensures thorough coverage
Specification
- Brand: International
- Capacity: 750ml & 2.5L
- Area: Above the Waterline
- Suitable for: Bilge/Lockers
- Finish/Sheen: Gloss
- Substrates: Aluminium/Zinc-Galvanised Steel, GRP/FRP, Steel, Wood
- Application Method: Brush, Conventional Spray, Roller
- Recommended Number of Coats: 1 - 2
- Practical Coverage (Brush & Roller): 11 m²/L
- Practical Coverage (Spray): 7.38 m²/L
- Typical Shelf Life: 2 Years
Colour Avaliablity
- White
- Grey
- Red
Preparation
PAINTED SURFACES
- In Good Condition Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180280 grade paper.
- In Poor Condition Remove all previous coatings and prime the substrate.
PRIMING All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD Prime with Yacht Primer or Interprotect.
STEEL Prime with Yacht Primer or Interprotect.
ALUMINIUM Prime with Yacht Primer or Interprotect.
GRP Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180220 grade paper. Particular attention should be given to the reverse side of moulded GRP. No priming necessary
Method
Sand the primer using 180280 grade wet or dry paper. Remove dust with a dust wipe. Apply 12 coats
Hints
- Mixing: Stir well before use.
- Thinner: Thinner No.1 (Thinner 910 for spraying)
- Cleaner: Thinners No.1
- Ventilation and Humidity Control: Apply in dry, well ventilated conditions.
- Conventional Spray: Pressure: 34 bar. Tip Size: 1.2 mm. Thin approximately 20% with Thinners 910. SPRAY APPLICATION PROFESSIONAL APPLICATORS ONLY.
- Other For added protection against moisture absorption and osmosis in the bilges, use Gelshield products.
Hazard Warnings
| Hazard Pictogram : |   |
| Signal Word: | Warning |
| Hazard Statements: |
Flammable liquid and vapour |
| Precautionary Statement: | General:
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention:Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Response:IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Storage:Keep cool. Disposal:Dispose of contents and container in accordance with all local, regional, national and international regulations. |
| Hazardous Ingredients |
Grey, White, Red: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics. |
| Supplemental Label Elements |
Contains Hydrocarbons, terpene processing by-products. May produce an allergic reaction. |
Technical Files
White - Safety Data SheetRelated Products
Related Products
International Toplac Paint - 750ml
International
International Super Gloss HS Topside Paint
International
International Interdeck Non-Skid Deck Paint - 750ml
International
International Teak Restorer - 500ml
International
International Yacht Primer - 2.5L
International
International Micron 300 Antifoul - Dark Grey 2.5L
International
International Micron 350 Antifoul - 750ml
International
International Cruiser 200 Antifoul - 375ML
International
International Interprotect Epoxy Primer - 2.5L
International
