Inflatable Boats Accessories

Sowester Rowlock for inflatable dinghies and tenders features an Oar Sleeve with swivel pin which interlocks into the oarlock mount  

Inflation valve to suit Sowester and Talamex Inflatable tenders comes with internal non-return valve and screw in cap.    

Sowester sliding drain bung to suit Talamex Aqualine and Highline Dinghies 270-300 - Provides a drain bung outlet with none return valve on the outside and a side to open or close on the inside.    

Sowester sliding drain bung to suit Talamex Comfortline and Highline Dinghy 195-275. Provides a drain bung outlet with none return valve on the outside and a side to open or close on the inside.    

A popular 'push and twist' dinghy inflator adapter with bayonet style fitting - Suits Sowester, Plastimo or Talamex Dinghies and many more. The adapter locks in place so attention can focused on pumping. Accepts 19mm or 25mm hose.

Replacement Oarlock to suit most Talamex, Plastimo and Sowester Dinghies. Sold Singularly

The Sowester outboard transom riser helps accommodate height adjustment when fitting a long shaft engine to a transom that is too deep for a short shaft but not quite deep enough for a long shaft.  Manufactured in powder coated aluminium...

Sowester Rowlock for inflatable dinghies and tenders features an Oar Sleeve with swivel pin which interlocks into the oarlock mount.

Polymarine PVC repair patch material roll , 70cm x 15cm - Use with PVC Glue Features PVC fabric. Cut to 70 x 15cm. For repairing damaged tubes and floors Colour: Grey

Polymarine Hypalon repair patch material roll , 70cm x 15cm - Use with Hypalon Glue Features Hypalon fabric. Cut to 70 x 15cm. For repairing damaged tubes and floors Colour: Grey

Polymarine Hypalon repair patch material roll , 70cm x 15cm - Use with Hypalon Glue Features Hypalon fabric. Cut to 70 x 15cm. For repairing damaged tubes and floors Colour: Black

Bostik 2402 is high performance, two-component, cold curing solvent-based adhesive. It is specifically designed for adhering a variety of rubber-based surfaces as well as rigid and semi rigid surfaces. widely used for bonding Hypalon and Rubber in...

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in blue...

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in grey...

Pair of Sowester Dinghy Oars to suit Talamex / Sowester series of inflatable boats and others similar brands. Feature 2 Piece aluminum oars to suit pin and lock style oarlock, as seen in the example below  

Pair of Sowester Dinghy 1.42m Oars to suit Talamex / Sowester series of inflatable boats and others similar brands. Feature 2 Piece aluminum oars to suit pin and lock style oarlock, as seen in the example below

Techtread Diamond Grip is an anti-slip rubber deck matting used in a variety of industries, most commonly marine. Suitable for use in cabin soles, cockpit areas, foredecks, boarding ladder treads and sundecks. 3mm thickness, sold per metre, in black...

Halkey Robert style, bayonet inflator hose adapter for inflatable tenders - Suits 19mm hose with multiple thickness adator washers for best fit.

Bostik 2402 is high performance, two-component, cold curing solvent-based adhesive. It is specifically designed for adhering a variety of rubber-based surfaces as well as rigid and semi rigid surfaces. widely used for bonding Hypalon and Rubber in...

The Sowester Steering Console can be put in any Talamex or Sowester Dinghy bigger than 2.9m and allows you to steer the boat from a comfortable centered position.The unit does not include the hub or steering wheel. The Sowester Console does include the...