Description
ILCA Laser Centreboard Stop Set by Holt
How to assemble
- Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap
- Fit the part assembled unit to the centreboard and then align and snap-on-second cap
- The Caps have faired side to fit the faired angle on centreboard - Make sure the allignment is correct before doing the final squeexe of the end caps to ensure a perfect fit
Tip : The caps require a fair amount of pressure to snap-on. Place one side of the set on a wooden board and push down from the other side with a heavy weight or even use you heel
It requires a smooth firm pressure but do not use a hammer
Related Products
Related Products
ILCA Laser Daggerboard Stop Sets
ILCA
Current Stock: 7
SEK116.43
ILCA Laser Centreboard or Daggerboard Stops - These push-together sets prevent the Daggerboard dropping too low
How to assemble
Allign the first cap fitting to the centre shaft and push down...
ILC3916
Special Offer
Holt ILCA Laser Vang Assembly
Holt
Current Stock: 0
Now
SEK1,871.72
Was
SEK2,339.79
Economical replica Holt HT7001 Vang Kicker System complete to suit ILCA and Laser Sailboats
In the Kit
1 x Vang Base Unit
1 x Wedge Kit for optional higher cleat angle with fastenings1 x High Tension...
HT7001
ILCA Laser Daggerboard with Re-inforced edge
ILCA Laser
Current Stock: 5
SEK7,840.27
High quality GRP infused ILCA /Laser Daggerboard to suit all model ILCA Dinghies - Fully approved for use in ILCA events from Olympics to Provincials. With re-inforced trailing edge
ILC3910
Holt ILCA / Laser Carbon Tiller
Holt
Current Stock: 4
SEK2,725.96
Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats.
Features
Flat low profile design
Stainless steel travellerwear plate
Suitable for...
HT7240
Laser 420 Centreboard
Laser
Current Stock: 0
SEK11,175.31
Replacement centreboard / daggerboard foil for Laser 42 sailing dinghy. Made from GRP- Designed especially for the Laser 42.
LS-85000
ILCA Laser Gooseneck
ILCA
Current Stock: 6
SEK315.37
ILCA approved, stainless steel gooseneck for ILCA 4, 6 & 7 sailboats - This goodeneck also suits Laser Performance models in Standard, Radial and 4.7 rigs
Specifications
Material: Stainless...
ILC4920
ILCA Laser Batten Set - Suits ILCA 4 & 6 and Laser 4.7 & Radial ILC109
ILCA
Current Stock: 23
SEK444.09
ILCA approved batten set to suit ILCA 4 & ILCA 6 Sails - Set of 3 - Also suits Laser 4.7 and Laser Radial
ILC2926
Laser Performance Daggerboard - Infused
Laser
Current Stock: 1
SEK6,728.59
Laser Performance Daggerboard Infused.
LS-85030
Laser Performance Pico/Bug Daggerboard
Laser
Current Stock: 0
SEK2,094.64
Direct replacement for the Laser Bug and Pico Daggerboard constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and bottom. Specifications Material: Aluminium
LS-85027
