Description
Economical replica Holt HT7001 Vang Kicker System complete to suit ILCA and Laser Sailboats
In the Kit
1 x Vang Base Unit
1 x Wedge Kit for optional higher cleat angle with fastenings
1 x High Tension Top Block with Vang Key
1 x Double Block withBecket
1 x 140cm 3.5mm Dyneema Red Primary Line
1 x 455cm 5mm Dyneem Red Secondary Line
Related Products
Related Products
Holt ILCA / Laser Carbon Tiller
Holt
Current Stock: 4
PLN1,004.85
Precision made, high performance carbon tiller to suit all models ILCA and Laser sailboats.
Features
Flat low profile design
Stainless steel travellerwear plate
Suitable for...
HT7240
ILCA Laser Lower Vang Tang - Official
Laser
Current Stock: 4
PLN47.23
Stainless steel kicking strap plate for Standard, Radial and 4.7 lower mast attached with rivets. Not nlcuded
Specifications
Material: Stainless steel
Fasteners 4.8mm x 12.8mm Stainless Rivets
ILC4923
ILCA Laser Boom Vang Key Plate ILC316
ILCA
Current Stock: 5
PLN68.80
Replacement boom vang plate for use with ILCA and Laser boats
Fasteners
Requires 4 x 4.8mm x 12.8m Stainless Steel A4 Rivets
ILC4932
ILCA Laser Centreboard ( Daggerboard) Stop Set by Holt
ILCA
Current Stock: 26
PLN55.86
ILCA Laser Centreboard Stop Set by Holt
How to assemble
Allign the first cap fitting to the centre shaft and push down hard to until the shaft is flush with outer side of cap
Fit the part...
HT70201
Special Offer
ILCA Laser XD Vang Kit - Harken & Ronstan Blocks
ILCA
Current Stock: 1
Now
PLN1,289.77
Was
PLN1,494.66
Harken high performance XD Vang Kit with lines, Harken base block, Ronstan Hi-Load and Orbit blocks, and includes high grade Harken vang key.
Suits all rigs ILCA and Laser...
ILCZ330
Special Offer
ILCA Laser XD Vang Kit - Harken Blocks ILC328
ILCA
Current Stock: 6
Now
PLN1,164.46
Was
PLN1,419.17
Harken high performance XD Vang Kit with lines and Harken blocks to suits all rigs ILCA and Laser Sailboats. Includes high grade Harken vang key
ILC4940
Special Offer
ILCA Laser XD Harken Vang Base Unit - HSB342ILCA
ILCA
Current Stock: 7
Now
PLN858.41
Was
PLN905.86
ILCA Laser XD Harken high performance vang base pulley unit - Fully ILCA Class legal and also compatible to all Laser Rigs, 4.7, Radial & Full Rig
Features
ILCA Class Legal
Clevis pins included...
ILC4945
ILCA Laser Secondary Outhaul / Vang Line 4mm x 4.95m
Laser
Current Stock: 17
PLN43.14
Laser Outhaul Control Line Pre-cut 4 mm x 4.8 m made from high quality Marlow Excel Control. Features Precision control and release Smooth cover giving low friction through the sheaves Firm...
LSM-30010
DB-Racing Vang Lines Pack - Suits ILCA® & Laser
Optiparts
Current Stock: 2
PLN120.57
DB-Racing Vang Line Pack comes with 3 mm Dyneema® primary vang line for Laser® and ILCA® with a spliced loop on one side for easy attachmentand 4 mm DB-Racing secondary control line, consists...
OPEX2216
