Description
GS-RH for 1-1/2" diameter rod holders
Features
- Easy to install
- Slip design is very versatile mounting option - simply slip into the rod holder and tighten top wing nut until the adapter is tight and immovable
- Two side notches so you can bend it to the desired angle.
Installation Instructions
- Put the mounting pin in place and then bend bracket. Make sure the Gullsweep® center pin is set (or bent) so the pin will be vertical to the water.
- Mount your Gullsweep® on the pin and be sure it will clear all obstacles when rotating.
- To remove, loosen the screw and pull out of rod holder.
Related Products
Related Products
Gullsweep Replacement Hub GS-3
Gullsweep
Current Stock: 31
€15.95
The Gullsweep Replacement Hub is the replacement joint that the arms attach to and swivel on.InstructionsSimply loosen the screws, replace the rods and refasten
88207
Gullsweep Model GS-P Storage Pouch
Gullsweep
Current Stock: 14
€42.95
The Gullsweep soft storage pouch provides a quick and easy way to assure your Gullsweep, when not in service, is safe and ready for redeployment. In many situations the Gullsweep is placed under the...
88202
Gullsweep Bird Deterrent GS-1 - 6ft Sweep
Gullsweep
Current Stock: 149
€77.95
Gullsweep - The original and the best
The Gullsweep Bird Scarer GS-1 is a truly simple and highly effective design. The wind vanes are designed to mimic predators to scare away any birds before they...
88200
Gullsweep Flex Mounting - Sand Bag Version GS-FM
Gullsweep
Current Stock: 22
€51.95
The Gullsweep Model GS-FM flexible mounting base is now supplied with four rope loops on the corners for easier mounting and filled with sand to provide a more stable base
88200/2
Gullsweep Bird Scarer GS-1 Short 3 Ft Version
Gullsweep
Current Stock: 22
€74.95
The Gullsweep Bird Scarer 6ft is a truly simple but highly effective design. The wind vanes are designed to mimic predators to scare away any birds and seagulls before they can foul your boat. The...
88190
