Frequently bought together:
Description
GS-RH for 1-1/2" diameter rod holders
Features
- Easy to install
- Slip design is very versatile mounting option - simply slip into the rod holder and tighten top wing nut until the adapter is tight and immovable
- Two side notches so you can bend it to the desired angle.
Installation Instructions
- Put the mounting pin in place and then bend bracket. Make sure the Gullsweep® center pin is set (or bent) so the pin will be vertical to the water.
- Mount your Gullsweep® on the pin and be sure it will clear all obstacles when rotating.
- To remove, loosen the screw and pull out of rod holder.
Related Products
Gullsweep Replacement Hub GS-3
Gullsweep
€15.95
The Gullsweep Replacement Hub is the replacement joint that the arms attach to and swivel on.InstructionsSimply loosen the screws, replace the rods and refasten
88207
Gullsweep Bird Deterrent GS-1 - 6ft Sweep
Gullsweep
€77.95
Gullsweep - The original and the best
The Gullsweep Bird Scarer GS-1 is a truly simple and highly effective design. The wind vanes are designed to mimic predators to scare away any birds before they...
88200
Gullsweep Model GS-P Storage Pouch
Gullsweep
€42.95
The Gullsweep soft storage pouch provides a quick and easy way to assure your Gullsweep, when not in service, is safe and ready for redeployment. In many situations the Gullsweep is placed under the...
88202
Feelfree Flush Round Rod Holder - L (Pair)
Feelfree Kayaks
€29.95
Universal flush mounted fishing rod holders - can be retrofitted to most sit on top kayaks. Supplied as a pair including rubber gasket and integrated rod leashes.
FF-91061
FeelFree Flush Mounted Rod Holder - M (Pair)
Feelfree Kayaks
€27.95
Flush mounted fishing rod holders with rectangular head. Designed to fit the recesses on the Nomad Sport, Juntos, Move, Gemini Sport and Corona. Supplied as a pair including instructions and screw...
FF-91060
