Gull & Bird Deterrents

This sandbag is a textile support of about 4 kilos (8,82lb) weight, suitable to install the StopGull Air device on the solarium.

Gullsweep - The original and the best The Gullsweep Bird Scarer GS-1 is a truly simple and highly effective design. The wind vanes are designed to mimic predators to scare away any birds before they can foul your boat.  They rotate in the lightest...

The  Gullsweep Model  HGS-1 is ideally suited for Sailboats or anywhere a straight vertical  halyard can quickly be deployed.   The Hanging Gullsweep® (Model HGS-1) is easy to install.  Tie a loop in the middle of a line...

The Gullsweep Bird Scarer 6ft is a truly simple but highly effective design. The wind vanes are designed to mimic predators to scare away any birds and seagulls before they can foul your boat. The arms are anodized aluminium and fold over when not in use...

GS-RH for 1-1/2" diameter rod holders Features Easy to install Slip design is very versatile mounting option - simply slip into the rod holder and tighten top wing nut until the adapter is tight and immovable Two side notches so you can bend it to...

​The StopGull Air can be installed on the mooring canvas with this Stopgull Air Boat Vent 3 Support Features Deters the landing of coastal birds on the mooring canvas while allowing ventilation inside boat Ventilation prevents moisture, mildew,...

The StopGull Topmast is designed to prevent seagulls, cormorants and shorebirds land on the top of the mast, thus avoiding breakage of the mast top elements. Features Presented with two kind of supports - basic and lateral.   

The StopGull Falcon is designed to keep away shorebirds of the mega-yachts and marinas installations.  Can also suit terrestrial uses such as crop protection. Features Instantaneous and permanent deterrent effect Needs only a slight breeze to...

The Stopgull Air Support for Folded Bimini Folded & Boom Support is used to install the StopGull Air device on any kind of folded bimini, and the aluminum booms when the sails are lowered. Features Comes with one meter long textile tapes with...

The StopGull Air suction cup to fit the StopGull Air. Features Includes the base to fit the StopGull Air Specifications Suits smooth surfaces  

The StopGull Air support for handrails is  suitable to be installed to any kind of handrails - bow or stern, hard-top, etc. Features Can be fitted in vertical or horizontal position Quick and easy to install. Specifications Made of anodized...

The StopGull Air is the device designed to deter the landing of gulls and coastal birds on boats - inflatables, hardtops or professional vessels. Features Easy to install Can be folded, removed from its base and stowed conveniently Utilises wind action...

The Gullsweep Model GS-FM flexible mounting base is now supplied with four rope loops on the corners for easier mounting and  filled with sand to provide a more stable base

Designed like a saddle to fit over any Boom or Bimini bundle. Tough & durable canvas construction, large end rope loops for tie down. Measures 9" x 23". Weight .4kg. Alloy rope securing wedge included. Non slip rubber inner liner~

Takes seconds to put in place and seconds to remove, then store when your boat is running. Gullsweep performs best when it is level to the water. Place vice clamp over railing & tighten so it is vertical to the rail. (Option, put tape around rail...

The Gullsweep Bird Scarer is sold seperately. The Gullsweep Replacement Base is a direct replacement mount for the Gullsweep Bird Scarer (see related products)Comes with 2 x screws for mounting.

Gullsweep Mounting Pin for the Gullsweep Bird Scarer (see related products).- Fits Gullsweep mount - Made from stainless steel.- Fits both 4ft and 6ft models

The Gullsweep Replacement Hub is the replacement joint that the arms attach to and swivel on.InstructionsSimply loosen the screws, replace the rods and refasten

These gull vanes come with everything necessary to replace the wind vanes on any of your Gullsweep bird scarers. 2 per pack GS-8 vanes.

The Gullsweep soft storage pouch provides a quick and easy way to assure your Gullsweep, when not in service, is safe and ready for redeployment. In many situations the Gullsweep is placed under the deck, in the rod holders, under the console, or just out

The StopGull Air can be installed on the mooring canvas with the Boat Vent 3 device. With this support, two benefits are obtained; avoid gulls and coastal birds land on the mooring canvas and at the same time allows the ventilation inside the boat,...

This kit support is used to fit the StopGull Air device to any kinds of inflatable boats. It is made of nautical acrylic fabric and flexible ropes with four hooks to fix at the external profile of the inflatable boat. The kit includes a telescopic mast...

The StopGull Air is the device designed to avoid landing of gulls and coastal birds at boats, boats’ hardtops, inflatable boats, sailboats and professional vessels. The StopGull Air is easy to install and it can be folded or removed from its base...

This StopGull support is used to install the StopGull Air when the Bimini arch is open. It's manufactured in AISI 316 stainless steel, and adaptable for tubes from 22mm to 28mm (0’86’’ to 1,10’’) diameter. The bimini arch...