Glassfibre Polyester Resin 2.5 Kg - This is a general purpose, top quality orthophthalic polyester resin which requires the addition of 1% – 3% MEKP Catalyst / Hardener to make it set...
Glassfibre Polyester Clear Resin 5Kg - This is a general purpose, top quality orthophthalic polyester resin which requires the addition of 1% – 3% MEKP Catalyst / Hardener to make it set...
Glassfibre Polyester Resin 1Kg - This is a general purpose, top quality orthophthalic polyester resin which requires the addition of 1% – 3% MEKP Catalyst / Hardener to make it set...
All polyester resins, including Gelcoat, must be catalysed with hardener before use. Uncatalysed resin will not harden.
Use 6 drops of catalyst into 10ml of resin. (As a guide 1 UK tablespoon =...
Glassfibre Acetone 2.5L is used to remove uncured polyester and epoxy resin from rollers, brushes and surfaces. It is highly flammable and is not recommended for use on skin.
Glassfibre Acetone 5L is used to remove uncured polyester and epoxy resin from rollers, brushes and surfaces.
It is highly flammable and is not recommended for use on skin.
Glassfibre Acetone 1L is used to remove uncured polyester and epoxy resin from rollers, brushes and surfaces. It is highly flammable and is not recommended for use on skin.
Topcoat or Flowcoat has a consistency between that of gelcoat and of resin but has a wax additive content to ensure a tack free surface when fully cured.
Its is used as a final coat on GRP laminate...