Neoprene Use for oil/water transfer Specifications Impeller material: Neoprene Insert material: Brass Drive type: Key Drive size: 3 Number of blades: 12 Diameter: 3 1/4" (83 mm) Width: 2 57/64" (73 mm) Shaft diameter: 25/32" (21 mm) Weight: 0.53...

The Nuova Rade Sagliola Fuel Tank 73L meets the requirements of the regulation EN ISO 10088 concerning the boats up to 24 meters length. CE Approved. Features Reinforced and rupture proof Fuel input diameter: 50mm Fuel output: 90o / dia:...

High grade 304 stainless steel Talamex trailer winch - Buy once and never buy again with these are corrosion free trailer winches. Easy to use and easy to maintain the winch has 1 gear and is a neutral and ratchet tie in both directions. With cog...

Replacement Oarlock to suit most Talamex, Plastimo and Sowester Dinghies. Sold Singularly

New 2023 model, Devotti ILCA 4 bare hull only. The Hull is common to all Rigs including ILCA4,ILCA6, & ILCA7 Devotti Sailing has a reputation as a master builder focussing on extreme perfection. This boat is built by an Olympic Sailor for Olympic...

New 2023 model, Devotti ILCA 4 sailboat with composite top mast and full competition rig. Official ILCA class approved for all ILCA approved events. The ILCA 4 (formerly Laser 4.7) is the entry level ILCA and ideal for those Sailors progressing from...

Plastimo Tessilmare radial PVC fender profile (Rubbing strake) Supplied in 16m rolls x  40mm width . These patented fender profiles combine high-impact strength with elegance and good value. Features 40mm Profile 16mtr Roll Forms to hull...

ILCA 4, formerly 4.7 Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, Composite Top Mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

Plastimo radial profile fender fixing track. Pack of 8pcs x 2m tracks. Component used for fixing 40mm Plastimo Radial Profile Fendering to the hull of a vessel  Features Suits 40mm Profile Forms to hull curve  Pack of 8 length, each length...

Teleflex Dometic outboard steering splashwell kit with 15° brackets Allows the steering cable to exit the splashwell without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

The ILCA 4 ( Formerly 4.7)  Sailing Dinghy  - Approved for ILCA event The ILCA 4  features the same hull as the ILCA7  Standard and ILCA6  Radial but has a smaller sail plan making it more manageable for lighter and younger...

Teleflex Dometic inboard universal angled transom cable mounting kit  New Dometic Art nr: 9130005750 

Plastimo 66203 white trim end fittings to suit Plastimo 40mm radial PVC rubbing fender profile P 66202 Features 40mm Profile Sold singullarly Colour White  

Teleflex Dometic outboard steering splashwell kit with 90° brackets Allows the steering cable to exit the splashwell without sacrificing splash protection  This cable connection is used for older model outboards without tilt tubes, low HP...

The ILCA 6 ( Formerly the Radail Class) Sailing Dinghy  - Approved for ILCA event - Manufactured by leading sail boat maker, Ovingtons The ILCA Radial features the same hull as the ILCA Standard and ILCA 4.7 but has the mid-level sail plan. Used...

Plastimo stainless steel end fitting for 40mm Radial Strip Fendering

New 2023 model, Devotti ILCA 6 Olympic sailboat with composite top and lower mast and full competition rig. Official ILCA class approved for  Olympics and all ILCA approved events. Devotti Sailing as a reputation as a master builder focussing on...

New 2023 model, Devotti ILCA 6 Olympic sailboat with composite top mast and full competition rig. Official ILCA class approved for  Olympics and all ILCA approved events. Devotti Sailing as a reputation as a master builder focussing on extreme...

Plastimo 66199 white trim junction fittings to cover join when using Plastimo 40mm radial PVC rubbing fender profile P66202 Features 40mm Profile Sold singullarly Colour White Top Cap / Join Cover   

Trem adjustable outboard cable steering tie bar L5303351 - Suits most single outboard installations Specification 316 Stainless Length 380mm Rod dia. 11mm

ILCA 6 Laser Dinghy (Formerly Laser Radial ), fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite top mast  and Hyde Sails.  Element 6 is one of the recently expanded group of...

New 2023 model, Devoti ILCA 7 Olypic sailboat with composite top mast and full competition rig. Official ILCA class approved for Olympics and all ILCA approved events. Devoti Sailing as a reputation as a master builder focussing on extreme perfection...

ILCA 7, the full rig Laser Dinghy, fully approved for ILCA Class events. Fully equipped and supplied with high performance XD /Harken equipment, composite upper mast and Hyde Sails.  Element 6 is one of the recently expanded group of ILCA Laser...

The ILCA 7 Full Rig Sailing Dinghy approved for ILCA event - Manufactured by leading sail boat maker, Ovington  The ILCA 7 Standard Rig Boat features the same hull as the ILCA Radail and ILCA 4.7 but has the full rig Mk11 Radial sail plan. This is...

In pop culture, it was a time like no other. Ronald Reagan was in the White House, The Terminator was in the box office and Run DMC was in certified gold. It was also the time when Oakley created one-of-a-kind sunglasses called Frogskins. Oakley...

Teleflex Morse anti- vibration kit for mounting 33c /3300 engine control cables  Features Suits all 33C / 3300 style cables Rubber shock absorber controls vibration Nylon clamps firmly hold the calbes in place  Base mounting

Dometic Seastar HA4642 replaceable pivot plate for use with hydraulic cylinder HC4648H

ILCA deck mounted fairlead for traveller system. Fits ILCA 7,6 & 4 and Laser standard, radial & 4.7.

This B&G V60 VHF marine radio featuresa built-in GPS and an AIS receiver, which allows you to see nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up to two optional wireless handsets...

This B&G V60-B VHF marine radio features a built-in GPS and a full Class B AIS transmitter and receiver, which allows you to see and be seen by nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up...

This B&G V60-B VHF marine radio featuresa built-in GPS and a full Class B AIS transmitter and receiver, which allows you to see and be seen by nearby AIS-equipped vessels. The low-profile design radio grants flexible mounting options and supports up...

Lofrans Control Box for 24v Windlassses with 500 -1700w Motors Specification Voltage : 24v Wattage Range : 500w-1700w Connections : 4 Terminals

The Crewsaver XD Quick Release Belt is a personal safety system aimed for professional use by emergency service teams during bank side flood rescue. Designed to provide a quick release attachment point, this system facilitates the use of an O-ring and...

Lofrans Control Box for 24v Windlassses with 500 -1700w Motors Specification Voltage : 24v Wattage Range : 500w-1700w Connections : 4 Terminals

This adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that require a 8-pin connection Compatable Units  echoMAP™ 50dv echoMAP™ 50s echoMAP™ 70dv echoMAP™ 70s GPSMAP®...

The Icom SP-37 is a weatherproof hailer horn for external use. Max input power 40W Cable length: 35cm Cable termination: Stripped and tinned bare wires Impedance: 4 Ohms Dimensions Length 23cmWidth 20cmHeight 15cm

Specifications Aluminium Hard anodised Inside diameter: 6mm Fixing hole size: 4mm Fixing spacing: 23mm Weight: 12g