V-Tronix heavy duty, stainless ratchet VHF Antenna Mount,  suits most antennas with 1" x 14 TPI female thread.  Four-way ratchet design for deck or side mounting. Features Quick release lever allows antenna fold-dow Special cable slot...

Four-way ratchet design with handle, for deck or side mounting. Features Standard 1" x 14TPI thread  Not for use with antennas longer than 2.4m in self-supporting mode Bolt holes: 5/16in dia., 3in x 1½ in on centre Hardware: sold separately

Heavy Duty RG-213 VHF Cable - Sold per meter. VHF antenna cable for AIS and VHF devices. These cables use 50 Ohm RG213 coax. Fits PL-259 connectors (see related products list below). Sold per meter.

Sowester RG213 VHF cable plug PL-259-9 . For use with  heavy duty RG213 coaxial cable.  Specifications Ohms Rating: 50 Ohms Cable entry: 10.3mm (RG213) Material: Silver plated Brass

The V-Tronix VHF MD15 is a 2.8m commercial grade marine VHF antenna, carefully constructed and capable of withstanding the worst elements. All the V-Tronix antennas offer excellent bandwidth/VSWR characteristics within the frequency range of 156 MHz -...

SL156C V-Tronix Emergency VHF Antenna for instant set up, if your main antenna becomes broken or disabled. Approved for RORC racing. Features Sealed in waterproof container  Stored easily on bulkhead or in flare pack  6m of miniature coaxial...

V-Tronix Commercial Heavy Duty VHF Aerial MD7A.This Commercial Marine VHF Antennas is carefully constructed and is capable of withstanding the worst the elements can throw at it. The antenna offers excellent bandwidth/VSWR characteristics within the...

Shakespeare Galaxy VHF Antenna - 8’ (2.4m) VHF Marine Band 6dB. Features Brass and copper elements Chrome-plated brass ferrule with standard 1in-14 thread Includes 15ft RG-58 cable, which can be cut to size, and a PL-259 connector Suggested...

Shakespeare 5101-S  V-Tronix VHF Antenna - 8’ (2.4m) VHF Marine Band 6dB. End-fed with matching stub. A new standard of excellence in an economical antenna! Shakespeare brings you the best of the high-end features in an 8ft antenna with a...

One of Shakespeare’s most economical and value-packed VHF antennas, the Classic 420 is ideal for day-to-day cruising in calm to moderate seas. The Lift-n-Lay action means you can quickly fold down the antenna, whenever you need, with no tools...

5215 Classic AIS Squatty Body® Antenna   3′ (0.9m) VHF/AIS Marine Band 3dB Gain Communication performance over VHF marine frequencies is optimized with the master craftsmanship of this Classic 5215 Squatty Body®, built...

End-fed 1/2-wave stainless steel whip antenna in 90cm.The 5215-D ia light weight, low-profile, stainless steel whip antenna, specially designed for masthead mounting on sailing boats.Please note: This unit requires additional RG58 cable, PL-259 and ac151...

Replacement Wind Indicator for Hawk antenna.Replacement kit to suit the YHK antenna.

The V-Tronix stainless steel whip VHF antenna with Hawk wind indicator fitted. See V-Tronix code: YHK. The Hawk was designed and developed to meet the requirements of the most demanding sailors. It features the popular V-Tronix solderless connector...

The MD20 V-Tronix Stainless Steel Whip Antenna has been designed to withstand the most rugged punishmentand is manufactured to the highest standards and quality – All vulnerable electrical parts are sealed in epoxy resin to resist water ingress...

The V-Tronix Raider Antenna for rigid inflatable boats (RIB's) and powerboats where shock can usually affect the fibreglass in other antennas this one comes in a marine painted steel whip antenna for durability and long life. See V-Tronix code: YRR...

V-Tronix 427-S 1.5m powerboat VHF fibreglass antenna for small to medium craft.Good looking, durable, smooth gloss finished, white fibreglass VHF antenna, ideal for power and work boats427-S Features- Durable, smooth gloss finished, white fibreglass VH.

Shakespeare VHF Antenna - 427N The Shakespeare 427-N 1.5m fibreglass VHF antenna with 3db gain designed for small to medium boats. This antenna replaces the old RV120-P and coes with 6m cable and PL259 plug.V-Tronix brings you the best of the high-end...

The V-Tronix MD23N VHF Antenna antenna has been designed to withstand the most rugged punishment. It is manufactured to the highest standards and quality and all the vulnerable electrical parts are sealed in epoxy resin to resist water...

An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. The 5206-N has a nylon ferrule. Features Quality copper cable elements for good range and efficiency Nylon ferrule Includes 15ft...

Scanstrut Radar Mount LM-BF1 suits the 2Kw 4Kw Raymarine or Garmin radomes.Mounts forward of backstay for 2kW / 4kW Ray marine, Garmin and Navico BR24 / 3G / 4G radomes. Automatic Self-levelling Radar Mounts ensures your radar stays level with the...

Install GPS & VHF antennas above the radar for maximum visibility and performance using the Scanstrut Pole Mount SC111 The Scanstrut Pole Accessory is designed for the installation of GPS antenna and Whip type antennae of up to 1m in height...

Scanstrut SC110 fits Perko 200, Aqua Signal 25 & 40 series lights for poles or antenna. They mount the navigation on the same Scanstrut mount as your radome to save space while positioning it higher for practical use. Install a navigation light above...

Scanstrut Pole Mount SC101 1.9m1.9m (6.4') complete pole system for 2kW / 4kW Raymarine; Garmin and Navico BR24 / 3G / 4G radomes. 1.9m (recommended for deck mounting) for Raymarine, Simrad and Garmin 2kW and 4kW radomes.Totally universal, SC100 Pole...

Gantry mount for Aluminium / Stainless PowerTower. Only compatible as part of a radome installation. Features Mounts navigation / search lights and GPS / VHF antennas Pre-drilled to fit Aqua Signal 25 and 40 series lights, Hella 2984 series, Hella...

For installation with Composite & Aluminium Power Tower. Angles your radar down 4° below horizontal and provides a level horizon for your radar when the boat is bow’s up underway. Features Fits under the base of your Power Tower Pre-fitted...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 350mm / 14" high: greater clearance and increased radar horizonOffering a single monocoque structure for outstanding strength and surface...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 150mm / 6" high: ideal for clearance of smaller obstaclesThe Scanstrut PowerTower PT2004 is expertly designed to install your antenna on the...

Stainless steel mast mounting brackets for Echomax Radar Reflectors EM305.

The Echomax EM230 Bracket suits the Em230 Midi Base Mounted Radar Reflector only.Please note: Echomax Radar Reflector in picture not included (see related products) Features Stainless Steel Suits 230 Midi Base Mount Only Reflector not included!

Echomax Radar Reflector Mast Bracket - EM180Pair of Stainless Steel mast mounting brackets for the Echomax 180 radar reflector.

Mast Mounting Brackets to suit Echomax Radar Reflectoes model EM230, EM230BR & EM230 Midi

The EM305PE is a popular high response radar reflector with a robust Polyethylene case and is suitable for large 15 - 20 metres size vessels. Successfully tested by QinetiQ to ISO 8729-1999 and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2...

Echomax EM230 midi base mount radar reflector with light and 4m power cable. EM230 basemount suitable for direct installation on wheel house roofs, RIB A frames, marker buoys. Robust four hole base fixing and supplied with fixing kit comprising of...

The Echomax EM230I Inflatable Radar Reflector combines superior performance with complete flexibility in terms of use and mounting options. "Highly recommended in Yachting Monthly 2012- Exceeds RORC requirements"The 230I Reflector is a DuPont...

Echomax 230 BR Radar Reflector- This model is a retrofit replacement for the Firdel Blipper 210-7 and is suitable for vessels 9 metres and above. Features Restyled case with fixing centres of 545mm. Direct replacement for the Firdell Blipper 210-7...

The medium sized Echomax radar reflector with a maximum 20 m2 radar cross section is suitable for 8-15 metres sailing yachts, RIBs and motor cruisers. Suitable for mast, deck bracket or halyard suspension. Fully tested by QinetiQ. Exceeds...

The Echomax 180 is ideal for smaller vessels 6-8m and has a variety on mounting options. It can be halyard suspended or mast mounted with the addtion of Bracket EM180MB or Deck Mounted with the addtion on Bracket EM180DBEchomax have utilised the largest...

A compact cylindrical radar reflector effective to at least 2.5 miles and ideal for mounting on A frames for RIBs or small yachts. Features Material: Plastic casing and aluminium reflector. Dimensions: 50mm x 500mm Weight: 0.5kg

Trem 18" Aluminium Radar Reflector. Features Meets RORC Simple to assemble Folds flat when not in use Specifications Weight: 1.1kg Dimensions (Diagonal): 46cm x 18"