The V-Tronix MD23N VHF Antenna antenna has been designed to withstand the most rugged punishment. It is manufactured to the highest standards and quality and all the vulnerable electrical parts are sealed in epoxy resin to resist water...

An economical and lightweight, self-supporting antenna for good communications where range is not the predominant factor. The 5206-N has a nylon ferrule. Quality copper cable elements for good range and efficiencyNylon ferrule.Includes 15ft RG-58 cable,...

Scanstrut Radar Mount LM-BF1 suits the 2Kw 4Kw Raymarine or Garmin radomes.Mounts forward of backstay for 2kW / 4kW Raymarine, Garmin and Navico BR24 / 3G / 4G radomes. Automatic Self-levelling Radar Mounts ensures your radar stays level with the horizon...

Install GPS & VHF antennas above the radar for maximum visibility and performance using the Scanstrut Pole Mount SC111. The Scanstrut Pole Accessory is designed for the installation of GPS antenna and Whip type antennae of up to 1m in height...

Scanstrut SC110 fits Perko 200, Aqua Signal 25 & 40 series lights for poles or antenna. They mount the navigation on the same Scanstrut mount as your radome to save space while positioning it higher for practical use. Install a navigation light...

Scanstrut Pole Mount SC101 1.9m1.9m (6.4') complete pole system for 2kW / 4kW Raymarine; Garmin and Navico BR24 / 3G / 4G radomes 1.9m (recommended for deck mounting) for Raymarine, Simrad and Garmin 2kW and 4kW radomesTotally universal, SC100 Pole...

Gantry mount for Aluminium / Stainless PowerTower. Only compatible as part of a radome installation.Mounts navigation / search lights and GPS / VHF antennasPre-drilled to fit Aqua Signal 25 and 40 series lights, Hella 2984 series, Hella NaviLED Prod...

For installation with Composite & Aluminium PowerTower Angles your radar down 4° below horizontal and provides a level horizon for your radar when the boat is bow’s up underway. - Fits under the base of your PowerTower- Pre-fitted...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 350mm / 14" high - greater clearance and increased radar horizonOffering a single monocoque structure for outstanding strength and surface...

To mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomesRadar Height: 150mm / 6" high - ideal for clearance of smaller obstaclesThe Scanstrut Powertower PT2004 is expertly designed to install your antenna on...

Stainless steel mast mounting brackets for Echomax Radar Reflectors EM305.

The Echomax EM230 Bracket suits the Em230 Midi Base Mounted Radar Reflector only.Please note: Echomax Radar Reflector in picture not included (see related products) Stainless SteelSuits 230 Midi Base Mount OnlyReflector not included!

Echomax Radar Reflector Mast Bracket - EM180Pair of Stainless Steel mast mounting brackets for the Echomax 180 radar reflector.

Mast Mounting Brackets to suit Echomax Radar Reflectoes model EM230, EM230BR & EM230 Midi

The EM305PE is a popular high response radar reflector with a robust Polyethylene case and is suitable for large 15 - 20 metres size vessels. Successfully tested by QinetiQ to ISO 8729-1999 and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2...

Echomax EM230 midi base mount radar reflector with light and 4m power cable. EM230 basemount suitable for direct installation on wheel house roofs, RIB A frames, marker buoys. Robust four hole base fixing and supplied with fixing kit comprising of...

The Echomax EM230I Inflatable Radar Reflector combines superior performance with complete flexibility in terms of use and mounting options. "Highly recommended in Yachting Monthly 2012- Exceeds RORC requirements"The 230I Reflector is a DuPont...

Echomax 230 BR Radar Reflector- This model is a retrofit replacement for the Firdel Blipper 210-7 and is suitable for vessels 9 metres and above. Features Restyled case with fixing centres of 545mm. Direct replacement for the Firdell Blipper 210-7...

The medium sized Echomax radar reflector with a maximum 20 m2 radar cross section is suitable for 8-15 metres sailing yachts, RIBs and motor cruisers. Suitable for mast, deck bracket or halyard suspension. Fully tested by QinetiQ. Exceeds...

The Echomax 180 is ideal for smaller vessels 6-8m and has a variety on mounting options. It can be halyard suspended or mast mounted with the addtion of Bracket EM180MB or Deck Mounted with the addtion on Bracket EM180DBEchomax have utilised the largest...

A compact cylindrical radar reflector effective to at least 2.5 miles and ideal for mounting on A frames for RIBs or small yachts. Features Material: Plastic casing and aluminium reflector. Dimensions: 50mm x 500mm Weight: 0.5kg

Trem 18" Aluminium Radar Reflector. Features Meets RORC Simple to assemble Folds flat when not in use Specifications Weight: 1.1kg Dimensions (Diagonal): 46cm x 18"  

Trem 16" Aluminium Radar Reflector Features Meets RORC Simple to assemble Folds flat when not in use Specifications Weight: 0.9kg Dimensions (Diagonal): 40cm x 16"  

A tough and reliable extension speaker for VHF radios. Ideal for sail or power boats.A rugged, corrosion resistant speaker designed for outside use on sea going vessels. It can be stirrup mounted using the bracket provided or it can flush mounted by...

ICOM SP-24E standard external speaker for IC-M801, IC-M802 and GM800 Radio  Specification Maximum Input Power 7 W Rated Input Power 5 W Output Sound Pressure Level      N/A Impedance   8...

Scanstrut Dual PowerTower Satcom in 40cm to mount the following antennas:Radar: 2kW and 4kW Raymarine, Simrad or Garmin radomes OR open-array radarsSatcom/TV: any 40cm antenna Scanstrut’s Dual PowerTower® mounts allow the installation...

ICOM IC-M804 MF/HF Marine SSB Transceiver The ICOM IC-M804 is a long-range MF/HF Class E DSC radio for ocean-going sailors and commercial non GMDSS operators.  Based on the MED approved Class A GMDSS radio GM800, the IC-M804 is packed with features...

IC-M605EURO Multi Station VHF/DSC Radio with AIS Receiver The IC-M605EURO is an advanced Class D VHF/DSC radio with integrated AIS receiver, capable of showing real-time AIS vessel traffic information on the large colour TFT LCD display. This radio...

The Garmin 115i VHF is easy to install and to use, and compatible to most Garmin chartplotters and MFDs via the NMEA 2000 and NMEA 0183 network . The 115i has built in Class D DSC functionality and  GPS .  Features Fixed-mount radio...

The Icom IC-GM1600E Marine VHF handheld has been designed for GMDSS compliant survival craft communications. The radio is engineered to survive and function in the extreme environmental conditions common in marine emergencies and brings the latest Search...

  IC-M85E VHF/PBR Marine Radio Designed with a particular emphasis on commercial use the IC-M85E is a high-class waterproof marine handheld radio that meets both marine and simple Private Business Radio (PBR) applications. Compact and with a robust...

The Icom 73 Plus is a powerful marine handheld that features IPX8 submersion rating, 6 watts high output, long battery life and a compact ergonomic body amongst many other features. As such, it will be ideal for all leisure and commercial customers who...

IC-M73EURO Professional Marine VHF Radio The IC-M73EURO is a powerful handheld marine VHF radio that features IPX8 submersion rating, 6 watts high output, long battery life and a compact ergonomic body amongst many other features. As such, it will be...

Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water resistant housing and provides 3 easy mounting solutions: pole, surface or under-deck (for...

6 ft (1.8 m) 4-pin power cable for the Garmin Echo fishfinders. Compatibility: Echo 100Echo 101Echo 150Echo 151Echo 151dvEcho 200Echo 201Echo 201dvEcho 300cEcho 301cEcho 301dvEcho 500cEcho 501cEcho 550cEcho 551cEcho 551dv

Use the Garmin Cable Coupler to join 2 marine network cables (large) end-to-end.

This standard NMEA 2 Female Terminal is a light cable connector for one end of the backbone of the eletronics network. Sold singly.Used for the installation and setup or marine electronics inclduing Garmin GPS systems.

This standard Garmin NMEA2000 Male Terminator is a light cable connector for one end of the backbone of the NMEA2000 network. Sold individually 

When interfacing this 3-axis compass heading sensor to our marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.This heading sensor (based on Airmar H2183) uses...

Add components to your NMEA network by installing the Garmin NMEA2000 T-connector on your existing backbone cable.