Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot' not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specifications Material: Nylon plastic

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats.Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until its put under...

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder see code LS-8513.  Specifications Length: 710 mm

The Laser Tiller without extension for the Bug and Pico Sailboats comes with cleat and attachment fitting to connect flexible joint from tiller extension. Suits Laser Pico and Laser Bug.

The Laser Pico has a simple downhaul system equipped with a self releasing cleat for when you run aground.

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats supplied without the rudder, tiller or tiller extension. For a full rudder with tiller kit see code LS-8513.

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specifications Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs top and bottom. Specifications Material: Aluminium Length: 81.5cm Width: 19cm 

The Laser Gudgeon fits the Laser Pico's and Funboat sail craft constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold seperately and comes complete with a spacer and rudder retention spring clip. Specifications ...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on transom of dinghy to secure the rudder when in position. Specifications Material: Stainless steel

Talamex Drop Nosed Pins in AIS316 marine stainless steel in a variety of diameters and lengths

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"

Direct replacement for the Laser Bug and Pico Daggerboard constructed from aluminium. Official Foil from Laser Sailboats. Comes with end plugs and bottom. Specifications Material: Aluminium

High quality HOLT padded centre toestrap to suit RS Pico and Laser Pico . Replaces Laser Performance part no 83112 Mounting screws sold separately M5 X 2 mm pan head. Locator Diagram Centre Toe Strap position as indicated by Part No 83112

Genuine RS Laser Pico Toe Straps with padding both sides. Fitted in three positions on an RS Laser Pico: Two either side of the main hiking strap and the third in the crew forward position. Sold singularly Mounting screws sold separately M5 X 2 mm pan...

The official Laser Daggerboard Plate replacement firts Laser Pico's only. Made from black plastic, positioned above the shim and holds the daggerboard in place. Mounted using 6 x screws (M5 X 2 mm) sold seperately. Specifications Material: Plastic...

The RS Pico Slot Strip for the underside of daggerboard plate and housing. It is a flexible lip that allows the centreboard to be passed through the deck but stops water from rushing back into the cockpit.

Laser Performance Pico Race Sail Batten Set.

RS Pico / Laser Pico  5.14 m² new design main sail blue and white panels made from Dacron Specifications Colour: Blue/White With Sail Bag

RS Pico 1.09 m² rolled job in blue and white made from Dacron including sail bag. Specifications Colour: Blue

The Pico Mainsheet Ratchet Block is the direct replacement for the block on your Laser Pico.

The Mast Sleeve to suit the Laser Pico is fitted using 3/16" x 5/8" rivets (not included). The Pico Lower Mast Collar attaches to the mast and holds the boom in place, a rivet is used to hold the Pico Lower Mast Collar in Place. Specifications ...

Mast step plate, black plastic large hole to take mast foot, 4 holes to bolt it to the hull. Specifications Material: Plastic Colour: Black

The Laser Pico Gooseneck is the plastic u shaped fitting that attaches the mast to the boom while allowing it swing freely. Comes with U shaped clamp and boom insert. The Pico Gooseneck attaches the boom to the mast via a simple clipping in process.

Clew Hook (Jib Hook) to suit Laser Pico sailing dinghy.

RS Pico webbing loop to fit Pico Boom with stainless rivet  

Replacement Pico Boom with cleat, outhaul and boom block. Official Pico parts constructed from aluminium. Specifications Material: Aluminium

Clamcleat for outhaul adjustment on Laser Pico Boom - Retrofits with Clamcleat CL217 Mk1  Features Fits Laser Pico Material: Silver Aluminium Rope size: 3 mm - 6 mm Retrofits with CL217 Mk1 Fasteners Sowester A4 Stainless Rivets 4.8mm x 16mm ...

The Laser Pico Vang Plate for the boom has two attachment holes (3/16" x 1/2" rivets sold seperately) and a flat base. For a full Laser Pico Vang kit see code: LS-90507. Pico kicker vang boom plate. Specifications Material: Stainless...