DanLamp Navigation Light Replacement Bulb Bay15d - 12V 30CD 25W. Specifications DanLamp Item Number: 10065 Voltage: 12V Rated wattage: 25W Cap-Base: Bay15d Mean service life min.: 1000 timer Luminous intensity: 30 cd Product EAN: 5708995100655 NATO...

The Aquasignal Series 70 Double YELLOW TOWING Navigation Light is applicable for all vessels ≥ 20 m in length  ( Note images does not show correct colour). These Navigation lights fulfil all requirements of International Regulations for...

The Aquasignal Series 70 Masthead Navigation Light is applicable for all vessels ≥ 20 m in length. These Navigation lights fulfil all requirements of International Regulations for Preventing Collisions at Sea 1972 (COLREG) are published by the...

Green Navigation Lights are used on all motor boats as part of the IALA navigation system. The Series 25 Green Starboard light is mounted from behind (side mounted style).The Aqua Signal Starboard Light is for commercial and leisure boats under 12m...

The Aqua Signal Series 25 Port Navigation Light approved for vessels less 12m. Aqua Signal are the orginal makers of Series 25 range and still the best for quality and UV resistance. Features Range of visibility 2 nm  Bulb included Festoon 12V x...

The Aqua Signal Series 25 Port Navigation Light approved for vessels less 12m. Aqua Signal are the orginal makers of Series 25 range and still the best for quality and UV resistance. Features Range of visibility 2 nm  Rear side mounting  Bulb...

Masthead Navigation Lights are used on sail and motor boats when cruising under power.The Aqua Signal Masthead Light is perfect for commercial and leisure boats under 12m. The masthead light is mounted from behind (side mounting style). See related...

Labcraft flexible LED chart reading light with built-in switch and an overall length of 46cm Features Dual colour- Red or White Very low power – only 0.07A Durable adjustable arm Slimline design Integrated switch Specification Voltage Range :...

Modern 125mm diameter surface mounted cabin light with switch - 12v . White frame with frosted lens Features Made of ABS. Volts 12DC Power 4.4W Led 24 Lumen 328 Light color White Overall Dia 125mm Height 30mm

Labcraft LED Trilites have a clean, stylish look with a diffused lens and on/off switch - Popular with European charter boat operators and leisure boaters alike, they have proved the test of time in terms of reliability and rugged Single Strip 12 LED 3...

Replacement Sealed Beam for Jabsco Deck Light 45903-0000 Specifications DC voltage: 12 V Bulb power: 30 W Weight: 0.55 kg

Aqua Signal MIR LED is available with two different light fixtures: For outdoor installation please select MIRS, for indoor use MIRZ. Due to the LED the luminaire is energy saving and offers a long lifetime. It is easy to convert from T8 to LED...

The Bergen LED decklight from Aqua Signal, the high quality experts for lighting onboard commercial and leisure vessells. The Bergen floodlight can be used in a variety of places including the bait well, cockpit or just as a general LED floodlight...

The Labcraft LED Outdoor Light uses high intensity beams up to 2 lux to create a safe, bright and cheap to run worklight.Long life, high intensity Cree LEDsUsing the very best in LED technology, the SI4 produces a clean white light which creates a safe...

The Labcraft Novalux (TI3) produces a clean white bright LED light, creating a safe and bright working environment. The light can be used in almost any area thanks to multi-voltage engineering and can be mounted in most places due to its low-profile...

ML-ACR Automatic Charging Relay with Manual Control is 500 A magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine. Features Senses charging on two battery...

Automatically combines batteries during charging, isolates batteries when discharging and when starting engines. Features Dual sensing Designed for 12 V or 24 V systems 12/24 V auto ranging voltage input Hermetically sealed contacts/vaporproof Supports...

Features Busbars are used to consolidate multiple wires or feed multiple circuits Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contact Raised bus provides easy access to multiple...

Specifications Base material: UL 94-V0 rated, glass reinforced thermoplastics Bus material: Tin-Plated copper CDA 110/UNS11000 Maximum voltage: 300 V AC/48 V DC Number of terminal stud: 4 Terminal type: 3/8"-16 Stud Terminal stud torque: 15.82...

Provides a termination point for extending the length of outboard harnesses or other conductors. Designed for connecting high amp conductors Includes one black and one red insulator Specifications Colour: Black, Red Maximum voltage: 48 V DC Mounting:...

Eliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads. Features Rated IP66 - withstands water from heavy seas Perfect for passing high current cables through hulls, decks and bulkheads Large cables...

Eliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads. Features Rated IP66 - withstands water from heavy seas Perfect for passing high current cables through hulls, decks and bulkheads Large cables...

Eliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads. Features Rated IP66 - withstands water from heavy seas Perfect for passing high current cables through hulls, decks and bulkheads Large cables...

Eliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads. Features Rated IP66 - withstands water from heavy seas Perfect for passing high current cables through hulls, decks and bulkheads Large cables...

Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Base material is black nylon 8231 GHS Connects high amperage cables securely 150 A bus allows small wire connections at high amperage cable...

Insulated single stainless steel stud terminates multiple large conductors. Base Material is PBT UL94 V0 Connects high amperage cables securely Specifications Colour: Red Base material: Reinforced thermoplastic Maximum voltage: 48 V DC Stud dimension:...

Insulated single stainless steel stud terminates multiple large conductors. Base material is PBT UL94 V0 Connects high amperage cables securely Specifications Colour: Red Base material: Reinforced thermoplastic Maximum voltage: 48 V DC Stud dimension:...

These are very small terminal blocks and are typically used for electronics interfacing such as NMEA and other data connections where their compact size allows a large number of connections in a small space. They take a connector with a 6 hole to match...

Features Each screw pair is one isolated circuit Jumpers allow creation of common circuits Closed back design completely insulates power from the mounting surface Specifications Base material: UL 94 V0, PC Bus material: Nickel-Plated brass Screw...

Features Each screw pair is one isolated circuit Jumpers allow creation of common circuits Closed back design completely insulates power from the mounting surface Specifications Base material: UL 94 V0, PC Bus material: Nickel-Plated brass Screw...

These are very small terminal blocks and are typically used for electronics interfacing such as NMEA and other data connections where their compact size allows a large number of connections in a small space. They take a connector with a 6 hole to match...

Features The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications Base material: UL 94-V0 rated, glass reinforced thermoplastics Bus material: Tin-Plated...

Features The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications Base material: UL 94-V0 rated, glass reinforced thermoplastics Bus material: Tin-Plated...

The 2715 Cover is specifically designed for the BusBar models 2301 and 2303, providing a protective shield for these components. Features Lightweight yet durable construction, weighing 0.08lb (0.04 kg), ensuring optimal protection without adding...

In an electrical power system onboard a boat, the busbar is a bar of tin-plated copper that conducts electricity within a switchboard, distribution board, substation, battery bank, or other electrical apparatus. Blue Sea Mini Bus Bars 2305 are marine...

Easily add 4 fused circuits to the terminal of a battery provides power to new accessories in your boat or vehicle. Features Mounts on the battery terminal stud Screw terminals for securing wires Nylon insulated ring terminals included for each screw...

Consolidates branch circuits and in-line fuses Can be used for 24 hour circuits Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Accepts ATO/ATC fast acting blade fuses Models available with or without a cover Positive...

Consolidates branch circuits and in-line fuses Can be used for 24 hour circuits Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Accepts ATO/ATC fast acting blade fuses Models available with or without a cover Positive...

Consolidates branch circuits and in-line fuses Can be used for 24 hour circuits Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Accepts ATO/ATC fast acting blade fuses Models available with or without a cover Positive...

Features For use on systems up to 32 V DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact UL 94-V0 base resists high heat...