The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90 degree to the cleat. Kit Includes Fiber-reinforced 471 Carbo Cam 476 Extreme Angle fairlead Specifications Maximum working load: 150 lb (68 kg) Weight: 1.7 oz. (47 g)

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 15/16" (23 mm) Length: 1 7/8" (48 mm) Width: 15/16" (24 mm) Weight: 0.29 oz. (8 g) Technical...

Made of durable, flexible PVC, stand-up boots holdblocks up without snagging lines.The 369 fits 40 mm and 57 mm Carbo and Black Magic blocks. Specifications Height (A): 2" (51 mm) Width (B): 1 9/16" (40 mm) Weight: 0.45 oz. (12.7 g)

The 16 mm is Harken's smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Matches...

The cam mounting bracket attaches the trigger cleat to 76 mm (3") low-profile triples. It fits the 152 and 411. Specifications Fastener spacing: 2 5/8" (66 mm) Fasteners: #10 TH inch (5 TH mm) Fits cam: 418 Height: 1/4" (6 mm) Length: 3 9/64" (79 mm)...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1...

Low-friction carbo blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 1 1/8"...

Use the 237 and 339 where there is little deflection in the line such as when routing a spinnaker pole foreguy aft along the cabin house. Specifications Maximum line diameter: 1/4" (6 mm) Fastener spacing: 0.71" (18 mm) Fasteners: #8 RH inch (4 RH mm)...

The Baltic Skipper 1280 is an approved 100N inherent buoyancy lifejacket, ideal for non-swimmers and for coastal and offshore conditions where you require to have absolute confidence in the safety of your child on the water. A crotch strap and strong...

Strong aluminum jib leads deflect jib sheets to winches, preventing overrides. These jib leads have two small drilled holes through which a loop can be spliced to attach the hobble. This temporarily secures the jib/genoa clew to free-up a winch for mark...

Made of durable, flexible PVC, stand-up boots hold blocks up without snagging lines. The 370 fits 75 mm Carbo blocks. Specifications Height: 2 5/8" (67 mm) Width: 2 3/16" (55 mm) Weight: 1.1 oz. (30.8 g)

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications Minimum line diameter: 1/4" (6...

Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin ball bearings let cars instantly adjust and release under load. Delrin is a registered...

Harken Bolt-Down Fairleads are used on boats 6-15 m (20-50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Mainsheet block pin diameter: 1/4" (6 mm) Control block pin diameter: 5/32" (4 mm) Maximum working load: 1250 lb (567...

Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Harken Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6...

Specifications Material: Torlon Diameter: 3/16" (5 mm) Quantity: 20

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1 1/2" (38 mm) Shackle pin diameter: 1/4" (6 mm) Maximum wire diameter: 1/8" (3 mm) Maximum line diameter:...

Harken Soft-Attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1" (25 mm) Maximum wire diameter: 3/32" (2 mm) Maximum line diameter: 5/32" (4 mm) Fasteners: #10 RH inch (5...

Perfect solution for fastening applications, stays, blocks, jib tack point, lifelines, tether etc. High quality, drop forged stainless steel  with outstanding work and break loads . They feature a modern and optimized design to suit aesthetics of...

Folding Padeyes keep your deck and passageways clear. They’re ready when you need to attach a snatch block or fender, but fold safely out of the way when you don’t. Specifications Maximum working load: 3080 lb (1400 kg) Breaking load: 6160...

Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Specifications Sheave diameter: 1" (25 mm) Shackle pin diameter: 3/16" (5 mm) Maximum wire diameter: 3/32" (2 mm) Maximum line diameter:...

Wire Fairleads maintain a low profile while holding the line close to the cleat. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/4" (32 mm) Length: 2 9/16" (65 mm) Width: 1 1/4" (32 mm) Weight: 0.5 oz. (14 g)

Wedge Kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 27 mm Fits cam: 468, 471 Length: 48 mm Width: 24 mm Weight: 5 g

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1 1/16" (27 mm) Length: 2...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/2" (38 mm) Fits cam: 150, 365 Height: 1" (24 mm) Length: 2 9/16"...

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting. Specifications Fastener spacing: 1 1/16" (27 mm) Fits cam: 468, 471 Height: 3/4" (19 mm) Length: 1 7/8"...

Low-friction micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications Sheave diameter: 7/8" (22 mm) Shackle pin diameter: 5/32" (4 mm) Maximum line...

Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Specifications Maximum working load: 310 lb (140 kg) Breaking load: 1500 lb (680 kg) Car body height: 3/4" (19 mm) Length: 3 7/16" (87 mm)...

Low-friction carbo air blocks are lightweight, strong, reliable and affordable. Companions to the popular Harken black magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications Sheave diameter: 2...