The replacement Laser Vago Boom fully rigged 

Genuine RS Laser Vago Gennaker Sails - Standard model VAG-SA-300 including Sail Bag Specifications Material: Nylon

Laser Performance Vago Gennaker Sock.

The Laser Vago Standard Gennaker 10.85 m² rip stop nylon in yellow including sail bag. Specifications Material: Nylon Colour: Yellow

Laser Selden Mast Step attached to the cross beam on your boat with 2 x rivets (sold seperately). Connection bolt supplied for the Vago Mast.

These combined swivelling deck fairlead and camcleat assemblies are used for the jib sheet on both sides of the boat. Requires 3 x rivets for attachment (sold seperately). For the replacement cleat on its own (See Code: LS-91484).

The replacement Halyard Bag to suit the Laser Vago sailboats.

Assembled ready to sail, rudder head, tiller, rudder blade and extension.

Laser Bahia and Vago mainsheet block assembly. Does not include standup pulley (See Code: LS-91333).

Trapeze Loop with block pulley for the Laser Bahia sailing dinghy.

Mesh gennaker sock in grey to cover and protect the gennaker on your Laser Bahia.

Laser Bahia lower shroud wire and rope to suit the Laser Bahia Masts. Comes supplied with crimped eye to connect to deck (shackle not included).

Replacement Jib Halyard for the RS Laser Bahia sailing dinghy with wire halyard and rope tail. Genuine Bahia Spares

The replacement eyelet for the deck of the Laser Bahia or the bow of the Dart 16 screw in Bow eye.

This infused GRP centerboard is a multi-boat centerboard, compatible with both the RS Bahia and Vago ( Formerly the Laser Bahia and Laser Vago)

Replacement Inspection Port for the Laser Bahia and Laser Bug. Specifications Diameter: 4"

Metal gudgeon plates to suit the Laser Bahia and Vago sailing dinghies. Use the same part for the top and bottom gudgeons. Holds the rudder pintle on the transom.

Laser Vago and Bahia pivot bolt set to suit rudder.

The trapeze kit for the Laser Bahia with two handles, two cleats and two trapeze lines made from stainless steel wire. Optional trapeze pack for racing.

Laser Bahia Shroud wire is supplied as a single wire for the Bahia Mast.

The Laser Gnav Strut suits the Laser Bahia and Vago sailboats and are constructed from aluminium tube with end fittings. It connects the mast hinge fitting to the boom slider below using two clevis pins (sold separately).

Gnav slider runs on top of boom connects to gnav strut and carry's out the same function as a kicker or vang ( Selden 511-805-01)

The Laser Gnav Mast Fitting connects the hinges on the strut to the mast with the drop nose pin included.

Plastic replacement Bhaia mast heel. This part is also known as the 'Laser Bahia Mast Foot' not to be confused with the Laser Bahia Mast Step.

The Laser Bahia Mast Step holds the mast when it is positioned upright. Bahia mast step aluminium construction riveted to cross beam used to pin mast foot to cross beam.

RS Bahia Gennaker Pole (Formerly Laser Bahia) -Genuine Bahia Parts

Fully rigged Bahia mas,t complete with all fittings, halyards, standing rigging wires and spreaders.   Please note Shipping Restriction map apply to this product due to length 

The replacement sheave to suit the mast head on all Laser and Bahia sailing boats. The Laser Sheave is made from nylon plastic and fits onto the top of the mast with a clevis pin 3/16" x 1" (sold separately). Specifications Material: Nylon plastic

Auto Ratchet block 45 mm for the Laser Vago and Bahia sailboats.Ratchet blocks can come in manual or automatic versions. The manual requires a switch to turn the ratchet on and off. The auto ratchet blocks let the line run freely until its put under...

The modern Laser Bug or Pico Tiller Extension 710 mm with flexible attachment joint included. For a full Laser Tiller and rudder see code LS-8513.  Specifications Length: 710 mm

The Laser Tiller without extension for the Bug and Pico Sailboats comes with cleat and attachment fitting to connect flexible joint from tiller extension. Suits Laser Pico and Laser Bug.

The Laser Pico has a simple downhaul system equipped with a self releasing cleat for when you run aground.

The official replacement Laser Rudder Head with aluminum tiller for the Laser Pico or Bug Sailboats supplied without the rudder, tiller or tiller extension. For a full rudder with tiller kit see code LS-8513.

Laser Pico / Bug and Fusion Rudder Assembly with Blade, Head, Tiller & Tiller Extension Specifications Material: Aluminium

The replacement Laser Pico Bug Rudder Blade attaches to the transom through the rudderhead. Made in aluminium with composite end plugs top and bottom. Specifications Material: Aluminium Length: 81.5cm Width: 19cm 

The Laser Gudgeon fits the Laser Pico's and Funboat sail craft constructed in stainless steel. The Laser Gudgeon bolts onto the transom to attach a rudder (sold seperately and comes complete with a spacer and rudder retention spring clip. Specifications ...

Replacement Rudder Retaining Clip for the Laser Pico range of sailboats. Fits on the gudgeon bracket on transom of dinghy to secure the rudder when in position. Specifications Material: Stainless steel

Talamex Drop Nosed Pins in AIS316 marine stainless steel in a variety of diameters and lengths

The Laser Drop Nose Pin is used for the Picos, Vagos and Bahias - Suits the Mast Gate Claw Pin for the Laser Pico and the gooseneck connection for the Laser Vago/Bahia Mast.

The Laser 4" Hatch come with a the lid and surrounding housing. Constructed in white plastic suitable as a Laser Pico Hatch replacement. Specifications Material: Plastic Colour: White Diameter: 4"