BOAT CONTROL

The Lofrans SX3.5 Vertical Windlass 1700W/24V come with a drum pulley and a 12mm gypsy for ISO anchor chain. Suitable for boats between 16 and 21 meters. Lofrans Vertical Windlasses save space on your deck by positioning the shaft vertically...

The Lofrans T500 Capstan Winch is generally used for warping and mooring manouervers but can also be used for assisting in anchor recovery . The smart chromed capstan drum is surface mounted with the 12v motor and gearbox housed underdeck. The T500 has a...

Features Suits the Titan Windlass Parts Diagram The Lofrans Titan Bearing 51108 #632A is listed under part no: 632 below:

  Features Suits the Lofrans Titan Windlasses.

  Features Suits the Lofrans Titan

Replacement spare part for the Lofrans Titan Windlass.

Spare parts for Lofrans Titan Anchor winch - Titan Clutch Cone Part No 376

  Features Suits the Lofran Titan

Lofrans Titan Windlass Spacer #653 Features Suits the Lofrans Titan Windlass

  Features Suits the Lofrans Titan Windlass

Replacement Bearing for the Lofrans Titan Windlass. Features Suits the Lofrans Titan    

Official replacement part for the Lofrans Windlasses, the Lofrans Windlass Bearing 537 fits the Porgress 2 and Leopard models. Features Suits the Lofrans Progress 2 and Leopard series of Windlasses    

Lofrans Windlass Chain Stripper 335 - Tigres, Royal & Caymen Features Suits the Lofrans Tigres, Caymen or Royal Windlasses

Lofran Kit B Screws - Titan Screw kit B for Lofrans Titan windlass

Stainless steel spring used in Lofrans Windlasses. Features Suitable for the Lofrans Tigre, Titan, Cayman, Falcon Windlasses from Lofrans

Lofrans WINDLASS V. X3 CRO G+D 1500W/12V 8-5/16"BBB-5/16"HT The "X" vertical windlasses are suitable for sail and motor boats from 6m to 27m in length. They have different motorization attributes according to each model. For the X2 windlass and X3...

Lofrans X2 / Cobra Replacement DC Motor 12V 1000W Features Official replacement part for the Lofrans X2 (Pre 2010) and Kobra Windlasses. High power 1000 watt motor Specifications 12 Volt power supply 1000 Watt pulling force Part no: 961A

The Lofrans X2/ Project 1000 Gipsy engages 8mm chain for use with vertical windlasses. Specifications Chain diameter: 8 mm ISO 4565 / DIN 766 Material: Stainless steel Suits: Lorans X2 or Project 1000 Windlasses

Max Power Electric Tunnel Thruster CT 125 -  24v x 8.58(kw)suits 185mm tunnel  for Vessels 35 - 58ft The CT125 is the most powerful 185mm diameter tunnel thruster on the MAX POWER range.This high performance thruster is available in 24V and...

Maxpower joystock control panels are specially designed for use with the complete range of MAX POWER tunnel and retractable thrusters. Fitted using a simple hole saw cut-out, panels are easy to install and benefit from a simple and easily replaceable...

The Nautic Barge S/S Steering Wheel T11 - a strong and solid stainless steel steering wheel. Features Spokes manufactured from stainless steel with mahogany handgrips Taper: Standard Morse/Teleflex/ultraflex - fits all Morse, Teleflex and...

The Nautic Ketch Wheel T3B - a traditional ship's steering wheel with a mahogany wood external circle. Features Manufactured from the best quality seasoned marine mahogany wood with brass hub Finished in high quality polyuretane varnish Fit all Morse,...

The Nautic Racing Wheel T5 - a solid and strong stainless steel steering wheel. Features Steering wheel with six spokes, handgrip and hub in brilliant stainless steel. Taper: Morse/Teleflex standard taper - fits all Morse, Teleflex and Ultraflex...

The Seastar Capilano A200-11TMC is a heavy duty, bronze and stainless steel hydraulic steering cylinder with 11" stroke, 26 cu inch capacity and with clevis end. Features Heavy duty brass cylinder Suitable for single or dual rudder vessels Suitable for...

The Dometic Seastar BA150-7ATM is a aluminium and stainless steel hydraulic inboard steering cylinder with 7" stroke, 10.2 cu in capacity - Suitable for boats 9 -11.5m. Features Low friction hydraulic steering system Configurations for most...

The Seastar BA175-7TM is a aluminium and stainless steel hydraulic inboard steering cylinder with 7" stroke, 13.7 cu in capacity and Flexible Eye End. Features Suitable for single or dual rudder vessels Suitable for twin helm positions In/Out Bleeder...

Teleflex steering twin outboard tie bar for side mounted cylinder Model HO5009- Use with Seastar  HC5370 & HC5370-3 Side Mount Outboard Cylinders   Specifications Includes fittings kit  Length : Overall 94.5 - Centre to centre of eyes...

SeaStar HC5330 Steering Cylinder 125 8EMV suits all non power assisted BMW and non-power assisted Mercruiser 1 Features Cylinder model: BA125-8EMV Easy to install installation Easy autopilot interface Number of turns, lock to lock With Helm...

Seastar twin outboard, universal steering tie bar front mount, Single Seastar Cylinders, model HO6003 - This tie bar kit is used when linking twin outboard engines with just one pivot-mount steering cylinder. The Seastar HO6003 Tie Bar has a drive...

The Seastar Dometic HO6002 Tie Bar is used for linking twin outboard installtion with dual pivot, mount steering cylinders  Specifications Includes fittings kit Use with Seastar Dometic Cylinders HC5345, HC5348 & HC5358 For Outboards up to...

SeaStar SteeringCylinder 125-6VPS to suit power assisted, Volvo Sterndrives DPS & SX Features: Cylinder model: 125 6VPS Easy to install installation Easy autopilot interface New ORB adjustable stainless steel O-ring seal Number of turns,...

Seastar CHX8553P Xtreme is a side mount engine control black trim and Engine Cut Off Switch The ergonomics and features of the Xtreme control range are advanced beyond those of any other control on the market. A shapely, balanced handle design...

This Teleflex single function, twin lever Control is popular on commercial vessels. The configuration the NB0801-00 is two single function levers operating Throttle & Gear. Other configurations are available  2 x Throttle, 2 x Gear, 1 x Throttle...

Teleflex Safe-T II Performance Tilt NFB Helm -SH91190   For use with TXSSC62 Cables Major OEMs use SeaStar Solutions Safe-T II - It’s the next generation of Safe-T, the world’s No 1 rotary steering system - rugged, compact,...

Morse Terminal Pin Suitable for Morse 33c Cables or Morse 30 Series Cables.

Perfect to ensure a safe anchoring by easing the tension on the anchor windlass whilst also protecting the boat by reducing the chafe on rub rail and roller chock. Optimized design to avoid accidental release of the chain, the gripper is simply slipped...

Perfect to ensure a safe anchoring by easing the tension on the anchor windlass whilst also protecting the boat by reducing the chafe on rub rail and roller chock. Optimized design to avoid accidental release of the chain, the gripper is simply slipped...