Blue Sea Terminal Block 30A - 6 Circuit

These terminal blocks are used anywhere you need to connect wires together. Using a terminal block instead of butt connectors makes for a much neater junction that you can troubleshoot afterwards if necessary. These are standard duty blocks which are not as small and fiddly as the 2400 series and have a #8 screw. Rated up to 30 Amps AC or DC they are often found behind electrical panels, in ceiling voids where they are used for lighting power distribution, or at the base of masts where they make a connection that can be undone if the mast is unstopped. Using terminal jumpers allows you to join adjacent terminals together so you can have a single input wire feeding several branch circuits.

Features

• Closed back design completely insulates power from the mounting surface
• Each screw pair is one isolated circuit
• Jumpers allow creation of common circuits

Specifications

Circuits	6
Length	4.38in (111.25 mm)
Maximum Voltage	600V AC/DC
Continuous Rating	30A
Base Material	UL 94 V0, PC
Bus Material	Nickel-Plated Brass
Mounting Screw	#10 [M5]
Screw Material	Stainless Steel
Screw Terminal Torque	10 in-lb (1.13 Nm)
Terminal Screws	M4
Wire Terminal Size	#8 [M4]
Weight	0.21lb (0.1 kg)
Weight	0.21lb (0.1 kg)

Dimension Drawing

Blue Sea Terminal 30A All Models