Description
The Blue Sea L Series Solenoid, Model 7765, 150A 12/24V is ideal for switching DC subpanels, thrusters, windlass, inverters and other medium-amp DC loads. L-Series Solenoid Switches are remotely activated using a low amp switch and smaller
gauge wire.
Features
- Continuous duty, SPST - Normally Open
- Hermetically sealed contacts
- Activated by a remote ON–OFF switch BS-8230 (sold separately)
- Coil control circuit minimizes heating and amperage draw
- Continous Rating 150A
- CE Approved
- IP67 Rated
Specification
Control Circuit Connection | 22 AWG Tinned Wire |
Nominal Voltage | 12V DC 24V DC |
Coil Function | Normally Open |
Maximum Voltage | 320V DC |
Amperage Operating Current continuous | 0.13A @ 12 V 0.07A @ 24 V |
Input Voltage | 9-36V DC |
Amperage Operating Current when changing state | 3.8A |
Terminal Stud | M8 (accepts 5/16" terminals) |
Terminal Stud Torque | 90 in-lb (10.17 Nm) max |
Continuous Rating | 150A |
Intermittent Rating | 225A (5 min) |
Cranking Rating 30 sec | 600A |
Mounting Screw | #10 or M5 |
Mounting Screw Torque | 30 in-lb (3.39 Nm) max 15 in-lb (1.69 Nm) min |
Operating Temperature Range | –40°C to +85°C |
Weight | .95Lb (0.43 Kg) |
Tech Tip- Solenoid Switch vs Remote Battery Switch
Solenoid Switch: An electronic switch with no manual control,
for circuits where a manual battery disconnect is offered
elsewhere in the circuit.
Remote Battery Switch: A solenoid or relay with a manual
control switch allowing for switching if control circuit
is compromised and for service lockout.